The Tech2 was GM’s scan tool before they moved to the new RDI or something equally acronymny.The odds of finding a scan tool that will run bi-directional on a Saab are pretty slim. Ex-Saab dealer or specialist should have something, but a normal GM dealer probably doesn’t have the Saab specific card in their Tech 2. OTC and Snapon don’t even admit that Saab exists, and will barely acknowledge Volvo. Maybe one of the Chinese knockoffs, like a Launch or similar- they steal the software and clone stuff.
Solution of GM Tech 2 CANdi module interface not detected for gm Tech2 scanner error:
1. With the car ignition off, connect the gm tech 2 and gm tech 2 CANdi module(which now is one long cable).
2. Power up the Tech2 You will get 12V from the DLC (now it took me a half hour to find out the “DLC means “Data Link Connector” and is what we also call the OBD2 connector, so be prepared to be stumped by TLA’s (Three Letter Acronyms).
3. At the main menu press F3-tool options.
4. At the tool options screen select F9, CANdi Diagnostics.
5. There are two tests on the next screen, run them both. If you get pass on both, you are good to go. The CANdi should talk to your 2004+ car.
6. Either turn the ignition key of the car to on, or start it (for a C6 there isn’t an “on”).
7. Press the EXIT button until the Tech 2 goes back to the main menu.
8. Select F0, Diagnostics.
9. Make all the requested selections to get you to the module in the car you want to look at. You may be choosing body style; you may need the body code (sometimes the third character in the VIN) the engine size, manual or auto and sometimes radio type. You may also be asked about certain options, like ZL6. They are on a tag in the glovebox.
2015 CK-200 Car Key Programmer is 2015 latest CK-200 Key Programming tool. V38.03 Ck200 CK-200 car key programmer is better functions than ck100 auto key programmer. Autonumen Recommend 2015 CK 200 auto Key Programmer V38.03 Ck200 CK-200 car key programmer.
Leave a Reply