Star Diagnostic Star C6 OEM DOIP is the new mercedes diagnostic tool replace star c4/c5.Benz C6 support OEM DOIP prototol support new Mercedes & SMART vehicles.OBD2repair.com share you the Star Mercedes Benz C6 Xentry Diagnostics Star C6 Softwarwe to V3.0.1.508 update guide.
1.Vxdiag Benz C6 Xentry V3.0.1.508 update info:
1). Release XENTRY Diagnosis VCI (C6) driver and the compatible software XENTRY XDOS 2018.05
2). Release XENTRY Diagnosis VCI (C6) driver for XENTRY XDOS 2018.05
2.Upgrade newestDoIP firmware version 1.3.1.
3.Setup BENZ C6 driver
You need:
XENTRY Diagnosis VCI (C6) + XENTRY XDOS V3.0.1.508:
Reason: VCI + Xentry software, you can directly use after receive the package.
3.Vxdiag Benz C6 XENTRY XDOSV3.0.1.508 configuration:
* If you use your own Xentry software you need to configure by following our tutorial.
Remark: If the XENTRY XDOS V3.0.1.508 is setup automatically, you are required to configure the Xentry Diagnosis VCI by following the bellow procedure.
1.configure the Xentry Diagnosis VCI, select ” XENTRY Diagnosis VCI”
2.Click on “Configure”.
3.Click on “Continue”.
4.Click on “Continue”.
5.The “StartKey” is not found, click on “Manually” to enter “StartKey”.
6.Save key and click on “Application and Continue”.
7.Click on “Application and continue”.
8.Configuration complete, click on “Exit”.
9.Configuration complete, reboot the PC.
Configuration succeed and the XENTRY Diagnosis VCI is connected ok, then this icon below will display.
Leave a Reply