How to turn off Benz auto dimming rear view mirror with MB Star diagnostic tool

July 25, 2018 Eva Uncategorized 0

Equipment:
Mercedes Benz MB Star diagnostic system (SDS), take MB SD Connect C4 fro example
Dell D630 laptop running

Enabling Interior Rear-view Self-Dimming mirror with Star multiplexer instruction:

In Star DAS Developer Mode:

1. Install and activate Autonumen.com MB Star diagnostic software. Software is pre-installed and activated if you get the MB SD Connect C4 multiplexer with Dell D630 laptop bundle package.
2. Run DAS diagnostic software
3. Come to Control units group->F3
4. Select Body control module->F3
5. Select CGW option->F3
6. Select Control unit adaptations->F3
7. Select Read coding and change is necessary->F3
8. Select All codes->F3
9. Change Interior and Exterior mirror dimming to PRESENT
10. Press F3 to save the changes
11. Click F3 to transfer the coding to control unit
12. Click F2 to go back to the CGW section
13. Click F1 to back to the Control unit groups

Published on mb sd connect c4

Related posts:

  1. MB Star C5 Xentry Connect Mercedes Benz SD Connect C5 Enhanced than Mercedes sds C4 scanner
  2. MB Star C5 Xentry Connect Mercedes Benz SD Connect C5 Enhanced than Mercedes sds C4 scanner
  3. MB Star C5 Xentry Connect Mercedes Benz SD Connect C5 Enhanced than Mercedes sds C4 scanner
  4. How to enable Tire Pressure Warning dumb rotation with Benz MB Star Diagnostic tool

Be the first to comment

Leave a Reply

Your email address will not be published.


*