How to get Porsche PIWIS 3 to work on a vas 6154 head?

May 30, 2022 Eva Porsche Tester 0

Look here: How to use VAS6154 head with Porsche PIWIS 3

project PIWIS3 PT3G => VAS6154-Kolun a
look at below link when you take your right to use
1 have to have installed piwis 3 laptop.
2. install piwis 3 driver
3 put together vas6154 install the drivers for vas6154-piwis // attempt to update interface Flesch
, if you see 6154 as pt3g then it is ok if nevidi next step =>
4 separated you from laptop
5. Copy the deteskop and install VAS 6154 driver 3.0.2.807 // installation after installation tend to deteskopa the trash
6 interface connects you 6154
7 program you run driver
8 interface you see 6154
9 select USB. Save.
10 restart.
11 tart driver program tach app (the first option above left) choose passthru> pt3g-3 piwis install seeks interface.
12 restart
13 Interface joints run driver VAS6154 seen as a passthru pt3g update memory device, check the USB version pt3g dal see you ok almost 6154
Note: please be careful and do it on your own risk.
obdii365.com will not give support
Contributor: ibi1961

Update: Unless you find the 08 firmware
The picture below is VAS 6154
How to get Porsche PIWIS 3 to work on a vas 6154 head-1 (2) How to get Porsche PIWIS 3 to work on a vas 6154 head-2 (2) How to get Porsche PIWIS 3 to work on a vas 6154 head-3 (2)

Related posts:

  1. Possible to use Porsche PIWIS 3 on VAS6154 head?
  2. How to use the VAS6154 head on the Porsche Piwis 3
  3. How to use VAS6154 head with Porsche Piwis 3
  4. How to setup VAS 6154 to work as PIWIS3 PT3G?

Be the first to comment

Leave a Reply

Your email address will not be published.


*