cardiagnostic.us

Category Archives: Car Diagnostic Tool

Different between MB SD Connect Compact 5 and MB SD C4 Star Diagnostic Tool

Posted on by Posted in Car Diagnostic Tool .

MB SD C4 Star Diagnostic Tool is the professional diagnostic tool for benz cars and trucks. This is the popular tool which enjoy the market of Benz diagnosic Market.

Recently, one of the new tool which named MB SD Connect Compact 5 launch to the market. It is the update version of MB SD C4.

What is the different between these two tools?

The performs of MB SD Connect Compact 5 same function as MB SD Connect C4 with newer design. The new MB SD Connect C5 with same case as original Xentry Connect 5 multiplexer. Other features are exactly the same as MB SD C4. The new MB SD Connect C5 is cheaper in price than mb sd connect c4.

Comparing the features of MB SD CONNECT Compact C4 , what is the different?

1.The host communication connection end USES from design, to avoid inadvertently fall in the normal use of the communication port to connect and communication failure, etc.
2.DC 12 v power supply design/host upgrades to avoid the battery installation/battery voltage instability/host can’t enter the shutdown state, etc, caused by the motherboard and rapid  aging of the battery.
3.The host CPU radiator surface and perfectly fit alloy shell, good heat dissipation effect. Equipment running smoothly, don’t crash.
4.The host USES the tamper clasp, should to avoid fragile warranty sticker damage caused by the warranty disputes.
5.Host wifi protected the upgrade for PC plastic shell, solid quality does not affect the wi-fi signal.
6.OBD main telecommunication lines connected to the host end upgraded to VGA15 industrial-grade connector.
7.Network upgrade for gigabit connections/pure copper wire core/double layer aluminum foil/woven mesh/silica insulation material. Gigabit communication Against interference/pulling  open circuit / / fracture in low temperature.

MB SD C5 Supported System: ENGINE, automatic transmission, air conditioning system, SRS, ABS and ASR, MPL, GM, Benz original security DASX system, KEYZESS GO system and OBD II system, etc.

Lastest version software for MB SD Connect C5 is 2016.05.

Vehicle coverage : Mercedes Benz Car, Bus, Truck,Sprint, Smart from 2000 up to now;Especial for 2015 new models like W222, W221, W212, W203, 211,204,GL166, B 246, CLS 218, SLK172.

MB SD Connect C5 more special functions,such as engineer mode, remove limitations,etc.It can also support offline SCN coding functions.

For more detail information about MB SD Connect C5, please link to :https://www.autonumen.com/goods-5208-MB+SD+Connect+C5+with+DTS+monaco+And+Vediamo+Plus+EVG7+Tablet.html

Real vs Clone Nexiq USB Link 2 Bluetooth

Posted on by Posted in Car Diagnostic Tool .

Nexiq USB Link 2   genuine and the clone, a difference?

Many talk about Nexiq’s differences the original and the clone. I have the original Nexiq USB Link 2 and the clone. Here, share something with all of you. I hope it helps.

PACKAGE

Let’s start with the easiest way to tell the difference, and that’s packaging. This includes not only what the product looks like, but also the included accessories. Throughout this post, we will publish images side by side, with the authentic Nexiq USB Link 2 on the left, and the clone of China, USB Link 2 on the right. As you can see in the photos below, the real USB Link 2 comes in a nice hard plastic case. The image on the right comes from the clone of China, which contains no case. The cables and the adapter were stuffed into the box.

We then take the content to compare. The original device, shown on the left, comes with the adapter (with all the stickers), a long 6/9 pin cable, a special USB cable (which we’ll talk about later), as well as paperwork. The USB Link 2 clone adapter comes with a wide assortment of cables, covering just about everything. It also has loose stickers to place on the tool, along with a set of 3-disc DVDs.

In summary, the real USB Link 2 will come in a hard plastic case and will come only with the USB cable and the 6/9 pin cable. The fake and clone adapters from China and beyond will come with a great assortment of cables, as well as several DVD discs.

THE CABLE CONNECTOR

So far, not a huge deal. You can save $ 400, not just get a cheap plastic box, right? Well, there are many more differences, so let’s start with the cables and the connector on the Nexiq USB Link 2. Again, the image on the left is what the bottom connector looks like to the genuine adapter. The image on the right is the clone of China.

In summary, the true USB Link 2 will come with a 26-pin male connector for cables, while the USB Link 2 clone will come with a 15-pin male connector. Remember, Nexiq has put an authentication chip in each cable, so how can these clones do it? The answer is that the porcelain clone adapters are simply Nexiq USB Link’s original printed circuit boards placed in USB Link 2 enclosures. We will continue to prove this point as we move forward.

CABLES

One thing that people may like about China USB Link is that it comes with a wide assortment of cables – 8 different. The original comes only with the standard 6-pin and 9-pin cable, which is used on commercial trucks. The first thing we notice is that the part numbers are on the labels of the Chinese device. When inspecting these cables, we find that they are all cables for the original Nexiq USB Link, NOT the new USB link 2. This further proves the point that the China adapter is just an original USB link in disguise.

The other problem is that the 6-pin 9-pin cable included in the China clone is NOT the new 9-pin green that has been used in all 2016 truck models. This means that this cable will only physically connect to no trucks built in 2016 or newer. Even if you had the right cable, we have serious doubts that this clone of China is a new 500k bus speed management cable that use this green connector.

In summary, the USB Link 2 clone from China comes with more cables, but these are cables for the original USB link. The 9 pins provided by China will not be compatible with 2016 and newer model year trucks.

USB CABLE

The USB connection port is also different on the knock-off of China compared to the authentic USB Link 2. With USB Link 2, there is a fancy clip on the USB cable to prevent it from being detached of the adapter. On the cloning tool, we find that this is an “ordinary” USB cable connector, as you would on a larger printer or USB device. On the USB Link 2 clone we received, this cable was actually very hard to drive, and the plastic cracked a bit when we did it. Again, another reason to stay away from this tool and prove it is a fake / clone.

The other important thing to note is that on the clone / fake adapter, you will see that there is a hole in the bottom. On the original adapter, this is a real button that you could push.

CIRCUIT BOARD

Now that we have explored all the components, let’s take a look at the PCB inside the adapters. Again, we have the original adapter on the left and the China clone on the right. Without being a computer engineer, you can see the differences in the tips right away. The clone adapter is actually made up of 2 circuit boards, with wiring in between, while the original is a solid circuit board. The clone version does not contain a Bluetooth chip, so it is only USB.

NEXIQ 2 nexiq usb link 2 + Software Diesel Truck Interface and Software with All Installers

(Buying Guide)Nexiq USB Link 1 or 2? WiFi or Bluetooth?

Posted on by Posted in Car Diagnostic Tool .

Nexiq 1 or Nexiq 2?

Nexiq 1 is discontinued. no more updates but for most people it will still work just fine.
Nexiq 2 is the current model and has more future potential than what the nexiq 1 could do.

Cables for each are different so they are not interchangeable. When ordering, you should make sure you get 3 different cables. The standard 6/9 pin y-cable with the green connector on the 9 pin plug so you can communicate to the newer 500k baud network. A standard OBD II cable and an OBD II Cat cable to talk to Caterpillar engines in GM trucks. If you need to communicate to trailer ABS, you will also need a PLC adapter.

Do NOT buy the inexpensive clones that normally come with multiple cables. The clones are not reliable and if they update with nexiq software, they will become a brick.

The nexiq 2 clones don’t have 26 pin cables just the standard fitting also the usb connector is different and there is a hole by the usb connector on the clones as well.

Nexiq wifi or bluetooth?

Both will work off bluetooth but I find bluetooth very slow. It’s faster and easier just to use a cable to connect to the laptop. The cable is a standard USB “printer” cable. I like using a 5 meter cable so I can move the laptop out of the truck is I have to. There are times I’ve used the laptop on the other side of the truck and even under the truck. The long cable makes it easier. Occasionally, I’ll use bluetooth.

I have no idea what the wifi option is. To me, that would mean if the nexiq is communicating to the laptop over wifi then the laptop’s network connection isn’t connected to a router. Just ignore any wifi options.

Nexiq 1 or 2? wifi or bluetooth?

I’ve been able to talk to everything I need to with my Nexiq 1. It all depends on what software you’re using and what type of cable connections you have but they all will work with a nexiq. With the right software and an OBDII cable, I can even communicate to automotive. I used the OBDII cable yesterday to talk to a Hino.

There are a lot of other types of datalinks you can use and they will all work fine. Nexiq has sort of become the standard that all the software will work with plus you can get some add ons to make it better. The nexiq 1 didn’t originally come with a cable lock and the USB cable could break the connector on the motherboard if it was hit, bent etc from normal usage. I think they all come with the cable lock now which prevents the connector from being damaged. Mine also has a rubber protective boot that keeps it from getting damaged while being bumped and banged around from normal use.

There are a few vehicles that the nexiq just won’t talk to. Things like Mitsubishi (GM city delivery trucks etc) require a propriety datalink and there are a few others like that also. Espar heaters comes to mind. You need special hardware to communicate with them and it’s never inexpensive.

I just went to the nexiq site and downloaded the nexiq 2 wifi manual to see what it says. There are 2 options for wifi. peer to peer where the nexiq is connected directly to the laptop which means a second wifi card is required for the laptop if you want to stay connected to the companies network or you can allow the nexiq 2 to connect to the companies wifi network and your laptop connects to the nexiq through that network.

I find network communication to be sketchy at times. The position of the router in our shop gives poor wifi outside the shop so if you’re out of wifi range, you need to switch to a peer to peer connection. Personally, just go with the bluetooth version if you really need to do a wireless connection. 99.999% of the time, I connect through a USB cable because it connects quicker and the connection speed is much faster. If you ever need to do reprogramming, cable connection is highly recommended.

Wifi may have a much longer range but bluetooth will normally have around a 20-30 foot range. If your laptop is 20-30 feet away from the vehicle you are connected to, that’s a lot of walking to go back and forth from the truck to the laptop. A simple USB cable works much better.

I also noticed that the Nexiq 2 uses a different USB cable than what the Nexiq 1 uses. I guess the simplest way to describe it is the Nexiq 1 uses a USB printer cable end and the Nexiq 2 uses a digital camera end. I can’t remember the technical names from each end but they’re all easy to find cables if you need them in different lengths.

In conclusion, you’ll get what you pay for. Be careful to buy a Nexiq clone off! You may have issues with all the lights blink and they can not connect any more, you can not get warranty on Chinese clones so you are out of luck.If you still want to have a cheap clone one, autonumen.com is the the only supplier i recommend; he’s a man of his word to trust in. It begins as autonumen.com and turns to be autonumen.com. I’ve known this site for 7 years around, items from him are used with relief be’coz of professional tech support there. For others, I don’t support them and Nexiq won’t warranty them. Anyway, good luck.

Nissan Consult-3 Plus VS Nissan Consult-3 Diagnostic Tool

Posted on by Posted in Car Diagnostic Tool .

Consult -3 Plus for Nissan Function:

Consult-3 Plus for Nissan can support all the models of the Nissan and Infiniti from 1996 up till now, with all Consult II & III functions .

And Consult III Plus can calcaulate the new 20 digital password for the Nissan new cars.

Consult-3 Plus for Nissan (Nissan Consult 3+) work for all nissan car , infiniti car and nissan gtr car to 2016.
Consult-3 Plus for Nissan work with obd-16 connector for the new kind of car, work with 14 pin connector for the old kind of car.
Consult-3 Plus for Nissan support nissan car electrolic system diagnostic function.
Consult-3 Plus for Nissansupport nissan electromobiles such as Leaf.

Nissan Consult-3 Diagnostic Tool：

22.1

Nissan Consult-3 Functions:

1.Swift Diagnosis and Swift Repairs Through Automated Operations

The selection of CAN type as well as the identification of malfunction locations are completely automated, allowing CAN diagnosis to be done 17 times faster than previous method where the diagnostics system needed to be supplemented by the service manuals. Repairs involving reprogramming of the in-vehicle computer can be completed 1.5 to 2.5 times faster with the new system.

2.Automated Self-Diagnostics

The system is able to perform accurate diagnosis without having to rely on the diagnostic skills of technical staff at the dealership.Increased efficiency in operations based on wireless technology.
With wireless vehicle communication interface, it is possible to check the condition of the vehicle from either  inside or outside the vehicle. At dealerships in Japan, it is possible to access the Nissan network to retrieve both the maintenance technology data related to the diagnosis results and spot adequate information on service manual. The dealerships are also able to access their service database and refer to the vehicle’s maintenance history on the laptop PC.

3.Capable of Handling Multiple Complex Defects

The diagnostics tool is equipped with various functions including simultaneous self-diagnosis of an entire system, simultaneous data monitor for multiple systems, data recorder, and oscilloscope capability.

4.Enhanced Data Management with Improved Laptop PC

New features such as adoption of color-screen and large-screen monitor allow viewing of large amounts of information altogether for enhanced data management

5.Map Data Update Function for Hard-Disk Navigation System

Through high-speed data update system, it is possible to update map data in approximately 20 minutes with the new CARWINGS navigation system (hard-disk) equipped in the all-new Skyline and other future products.

FAQ
Q1: What is the difference among Nissan consult 3, consult 4 and Nissan consult 3 plus? Can Nissan consult 4 remap ECU and change IGN time-limited parameter?
A1:1) Nissan consult 3 and consult 4 share the same software version and parts, the difference between them is the appearance and the quality;
2) Nissan consult3 plus is the newest-released Nissan diagnostic  it supports the Nissan up to 2017 year. And only Nissan Consult 3 Plus can support programming.

Q2: What additional card needed when use Nissan Consult-3 plus to make key?
A2: It need additional card, it needs for making key, this card is Nissan Consult-3 plus Security Card, otherwise the button “Immobilizer key” is gray color and is unavailable.

which Nissan diagnostic tool you should take depends on the models you wanna work with and also the functions you gonna perform:

For new cars, Nissan consult 3 plus works good.

For old cars, Consult 3 Bluetooth version covers more models before 2010.

For obdii diagnosis, all nissan scanners above are ok.

For ecu programming/reprogramming, consult 3 bluetooth, consult 3 plus, consult 4 are all ok.
https://www.autonumen.com/goods-1610-Consult-3+Plus+for+Nissan+Nissan+Diagnostic+Tool+Support+Programming.html

How to use Nissan consult 3 plus to check, make key and program?

Posted on by Posted in Car Diagnostic Tool .

How to use Nissan consult 3 plus to test Nissan?

Firstly: get one particular Nissan consult 3 plus.

Second: prepare one laptop with Windows XP2 (SP2 or later on is okay), and Nissan Consult-3 Communication Mode is frequently USB two.0 or Bluetooth.

Third: prepare to set up Nissan consult 3 plus driver.

Fourth: during installation, pick the language you want. Nissan Consult 3 plus has 11 languages: Chinese (Simplified) Chinese (Popular) English Finnish French German Greek Italian Japanese Russian Spanish

Fifth: Nissan Consult 3 plus carry out menu exhibits: Scantool Diagnostics, ECU Reprogramming, Immobilizer and Intelligent key, Electromobiles motor car and Nissan GTR

Sixth: enter Scantool Diagnostics – pick Electronic Control Process – choose vehicle designs: Nissan, Infiniti, GTR and Renault- commence to diagnose. You’ll find two diagnostic cables to pick, a single is 16pin connector, one more is 14pin connector, when you diagnose old Nissan, connect 14PIN cable on the car or truck; when you test new Nissan,

Seek to connect 16pin cable for the motor car. With many of the identical operation, just enter towards the other menus: ECU Reprogramming, Immobilizer and Clever key, Electromobiles motor automobile and Nissan GTR.

Tips on how to use Nissan consult 3 plus to make key for Nissan?

If you have 1 Nissan consult 3 plus, and would like to make key for Nissan, you’ll need to have one more Nissan consult 3 plus security card.

Nissan Consult 3 Plus on autonumen.com security card is utilised to generate key for Nissan cars and trucks, addresses just about all Nissan car’s immobilizer from 1996-2011. Nissan Consult 3 Plus security card must functions with Nissan Consult 3 Plus. Just after insert the Security card, Nissan NATS Security system will probably be activated.

How to use Nissan consult 3 plus GTR card to check, programming?

Very first, you require to have one particular Nissan consult 3 plus, then get another Nissan consult 3 plus security card.

Nissan Consult 3 Plus GTR Card is compatible with Nissan Consult 3 Plus . GTR card support diagnosing, programming and immobilizer programmer for Nissan GTR vehicles

Nissan Consult-3 plus GTR Card is PCI-E port, so the computer that Nissan consult 3 plus runs with need “PCI-E” port.

Nissan consult-3 plus Battery Registration Card

To begin with, you will need to get a single Nissan consult 3 plus, then get yet another Nissan Consult-3 plus battery registration card. They works collectively will help programming of Nissan car energy module.

MB Star C3 cannot to work on new Mercedes W205 Solution

Posted on by Posted in Car Diagnostic Tool .

User puzzles:

I have installed Xentry 9.2014 in MB Star C3 multiplexer. It works well so far. Now, I need to make diagnosis on mercedes w205 year 12/2014 but It can not communicate with the car. C3 don’t work in all recent cars in xentry but in DAS is ok.

Experienced users’ suggestion:

C3 has many limitation regarding latest vehicles in Xentry.
It can’t diagnose it e.g w205, w212, w222, w906, smart 453 etc.

its glory is already passed unless you deal only with vehicles in DAS.
you have to change to MB SD Connect C4.
C4’s support also officially has been stop since 12-2015.

It is no different even you change folder.
it is different protocol with recent vehicles.

For your w205 (nice car) you can use one of this :
1.sd connect c4
2.xentry sd connect c5

Both good at all new Mercedes Benz models,W222, W221, W212, W203, 211,W 204,W207, W212, GL166, B 246, CLS 218, SLK172 and Smart405, 451, 452, 454

Besides the Car Diagnostic Tools MB Star diagnosis software c3 and c4 own, sdconnect c4/c5 added three more software: SD Media, Xentry and Smart TAN Code.
SD Media: Video and PDF lessons;
Xentry: New software released by Benz Company after 04/2009 by diagnosis new cars. Xentry software for diagnosing W 204,W207 and W212 which C3 and C4 does not support;
Smart TAN Code: Opened special function in DAS program with Smart cars 405/ 451/452/ 454.Besides, it also opened more special functions, such as engineer mode, remove limitations,etc, which Star C3 and Star C4 do not have.

Typical VCM2 clone SP177C SP177C1

Posted on by Posted in Car Diagnostic Tool .

There are 4 famous types of VCM2 clone Ford diagnostic interface, including the most populous VCM2 SP177C, SP177C1 (talked most in forums). Collect and share them here!
13.1
The hottest VCM2 clone model: SP177C&SP177C1, seems the same as this

13.2
13.3
13.4
In summary, good vcm2 clones usually cost $150 around. Never believe in the cheapest but best-quality! You will get what you pay for.See more click:www.autonumen.com

Buy Cheaper VAGCOM/VCDS 12.12 HEX USB CAN Interface from Autonumen

Posted on by Posted in Car Diagnostic Tool .

VAGCOM 12.12 is the newest version VAG diagnostic cable which fully compatible with all VW, Audi, Seat and Skoda models through the current model year, including models using a direct CAN connection for diagnostics.
Our VAGCOM Cable is demo version, is not a fully activated license.
VAGCOM 12.12 Support to the October 2013 Volkswagen Audi cars.
8.1
VAGCOM12.12 Change the system time automatically, the software is not expired, permanent and effective

VCDS 12.12 Automatically updated offline to prevent flash

VAG Diagnostic Tool VCDS12.12 With password protection

VAG COM 12.12 Support WINDOW xp and Windows 7 32 and 64 bit.
Note: When you install Vagcom12.12 software,the system will ask for the password.
password(xp and win7 32): xxxROSSTECH
password(win7 64):        fdsajkl;YYY
VCDS 12.12 is the most popular diagnostic cable with cheaper price.OBD2TOOL(Autosky) Co.,Ltd. Offer VAG cable with competitive price.Promotion price only 12USD/PC.If you are interesting in buy this tool,please no hesitate to contact our sales.

VAGCOM 12.12 Compare with old version VAGCOM 12.10.3,what is the different?

Posted on by Posted in Car Diagnostic Tool .

VAGCOM VCDS Description:
1. Is fully compatible with all VW, Audi, Seat and Skoda models through the current model year, including models using a direct CAN connection for diagnostics.
2. Has a database of more than 14000 fault-codes and measuring-block texts.
3. Can use the new 7-Digit PIN/SKC codes to match new keys in all immobilizer equipped VW/Audi/Seat/Skoda models.
4. Allows you to view, log, and graph 3 groups of Measuring Blocks at once.
5. Can access all control modules which require proprietary VAG modes running the KWP-2000 protocols (2001+ Teves Mk.60 ABS, numerous 2002+ modules), KWP6000 (CAN) and/or KWP7000 (UDS).

From Autonumen VAGCOM 12.12 VCDS12.12 Compare with old version vagcom 12.10.3,what is the different?

VAG COM VCDS 12. 12
Software Version: V12.12
Language: English

VAGCOM 12.10.3
Software Version: V12.10.3
Language: English
System Requirement: Windows 2000, XP, Vista both 32-bits and 64-bits

1. VAGCOM 12.12 Support to the October 2013 Volkswagen Audi cars.
2. VAGCOM12.12 Change the system time automatically, the software is not expired, permanent and effective
3. VCDS 12.12 Automatically updated offline to prevent flash
4. VCDS12.12 With password protection
5. VAG COM 12.12 Support WINDOW xp and Windows 7 32 and 64 bit.

Review on Chrysler wiTech Micropod 2 Diagnostic system

Posted on by Posted in Car Diagnostic Tool .

I’ve used Chrysler wiTech MicroPod 2 for diagnosis and programming for a few months, and here, wanna share something with you all.

JUST FOR SHARING!

I must say wiTech MicroPod 2 at Autonumen works perfect in diagnosis and programming in Multi-language, for Chrysler, Dodge, Jeep and Fiat cars. This is the same as the dealerships are using. It replaces your StarMobile, StarScan, and wi-TECH POD, and enables your technicians to increase their productivity and provide world-class diagnostic services

wiTech MicroPod II version:
V17.03.01

Working language:
English, French, Spanish, German, Italian, Russian, Japanese, Korean and Chinese

Abilities:
Provide basic OBDII diagnosis
Have access to module for Re-Flash Programming, TSBs, wiring diagrams, and repair information.

Note: wiTech ii supports chrysler and Fiat online programming, but the package from the vendor comes without fiat software; i have my own micro pod 2 fiat software so that i can installation and programming. )

Features:
Supports all the latest technologies and vehicle platforms including the latest Chrysler and Fiat Vehicles. Works as a direct replacement for the wiTech POD

Vehicles supported:
100% CAN?—?equipped coverage to 2016 for Chrysler, Dodge, Jeep, and Fiat vehicle

What you need:
A working PC
Automotive diagnostic equipment High-quality wiTech MicroPod 2 Chrysler diagnostic tool
Software V17.03.01
Chrysler/ Dodge/ Jeep/ Fiat car