cardiagnostic.us

  • Blog
  • ICOM A2
  • T300
  • CRP123
  • X431 GDS
  • X431 V
  • DS708
  • Autel MaxiSys Pro
  • Digimaster 3
  • AUTOBOSS V30

Monthly Archives: October 2019

Launch X431 V+ HD III VS HD-II working with X431 V+

Posted on October 29, 2019 by wp-admin Posted in Launch X431 .

What advanced features LAUNCH X431 V+ HD3 module has that HD-II module has no?

Good to know

HD-II module: compatible with X431 V+, X431 PRO3, X431 PADII etc, only available for Commercial Vehicles.

LAUNCH HD-III module : compatible with X431 V+, pad3, pro3 etc, only available for X-431 V+ of Commercial Vehicle Version.

Note:

Please buy HD-III module instead of HD-II module, because HD-II module is already stop to produce.

There are main 3 differences between X431 V+ HD-III module & HD-II module

Different 1.

HD-III module: in Blue color

HD-II module: in Red color

launch x431 HD III Scan Tool outlook

As the 3rd generation of heavy-duty module,Launch x431 HD iii scan tool works as a vehicle communication interface device, which is used to read the vehicle data and then send it to the X-431 V+ via wireless BT/WLAN communication. The LED indicators enable you to easily identify the working status of the module.

1 DC-IN power jack: For connecting the power adaptor.

2 Diagnostic socket: For connecting the diagnostic cable.

LED indicators: It is defined as follows:

 Vehicle: While communicating with the vehicle, the indicator lights up and flashes. Otherwise, it will not illuminate.

 Power: It illuminates solid red when the module is powered on.

 BT: Blue indicates the module is working in wireless BT mode.

 I/O: It lights up when the module is connected to the diagnostic tool via data cable (Currently disabled and only reserved for subsequent function extension).

 Wireless: It lights up when the module works as a wireless hotspot or network adaptor.

Data I/O port: Currently disabled and only reserved for subsequent function extension.

HD-II Module outlook

As the 2nd generation of heavy-duty module, it mainly functions as a VCI device for accessing vehicle data.

LED indicators: It is defined as follows(from left to right):

 Power Indicator: It lights up when it is powered on.

 Communication LED of Tablet: It illuminates when the module is communicating with the tablet.

 Communication LED of Vehicle: It lights up once the module is connected to a vehicle’s DLC.

 Communication LED of PC

 Data I/O LED

Data I/O port
Communication Port of PC
Diagnostic Socket: To connect the included diagnostic cable.
DC-IN power jack: To connect the power adaptor.

Different 2.

HD-III module: send the vehicle data to the diagnostic tool via wireless Bluetooth or Wlan

HD-II module: send the vehicle data to the diagnostic tool via wireless Bluetooth.

WIFI module:

HLK-RM08K

 Frequency range: 2412-2472MHz

 Transmit power: 19.29dBm

Wireless BT module:

YG-218M-A2

 Frequency range: 2402-2480MHz

 Transmit power: 16.62dBm

X-431 V+ is compatible with the following two Heavy-duty VCI modules. For different VCI modules, the communication methods vary.

Below shows how the X-431 V+ system works.

HD-III module:

Besides the BT communication, the LAUNCH X431 HD III VCI module comes loaded with a built-in WLAN module, which can work as a wireless hotspot or a network adaptor.

Below shows how the X-431 V+ system works.

HD-II module:

The HD-II module send the vehicle data to the X-431 V+ diagnostic tool via wireless Bluetooth only.

Leave a comment .
Tags: launch hd3, Launch V, Launch X431 V, Launch X431 V+ HD3, X431 V+ HD3 .

How to set GM MDI 2 wireless connection?

Posted on October 29, 2019 by wp-admin Posted in Professional Diagnostic Tools .

Firstly offer the procedure on how to set GM MDI 2 wireless connection, then solution to GM MDI 2 software error “Not connected to MDI”.

Part 1: How to set GM MDI 2 wireless connection:

Watch Youtube first:

What to do if MDI failed to connect on Wireless interface?

Check the wireless card is properly seated in the WiFi GM MDI.

Confirm LEDs on the wireless card are lighted when the MDI is powered.

Verify the MDI and PC are within range of the Access Point or Router.

Verify that the PC is connected to the Access Point or Router.

Verify signal strength of the wireless network from the PC.

Check Firewall Settings on your PC

USB connection takes precedence, unplug USB cable.

Wired Ethernet connection takes precedence, unplug Ethernet cable.

Connect to MDI using USB and run MDI Manager to verify the Wireless Settings are

configured correctly.

o Wireless interface is enabled.

o AP settings configured for proper security (authentication, encryption).

o Signal Quality (fair, good, excellent) indicates connected to AP.

o The MDI, PC and AP are on the same subnet

o If using static IP, verify the IP Address and Subnet mask are correct (supplied by network

administrator.

Part 2: GM MDI “Not connected to MDI” solution

All what you need do is to refresh the GM MDI firmware.

Leave a comment .
Tags: GM MDI 2, GM MDI 2 Diagnostic Tool, gm mdi 2 price, GM MDI 2 Scanner, GM MDI ii Scan tool, GM MDI2, MDI 2 GM, tech 3 .

MB Star C4 For Mercedes Benz Star Diagnostic Tool SD C4 Connect Multiplexer Review

Posted on October 29, 2019 by wp-admin Posted in MB Star .

MB Star C4 Mercedes Benz Star Diagnostic Tool works fine for MB Star Diagnostic & SCN online coding. All the MB Stra C4 SD Connect multiplexer  can get free technical support for the device, botht MB SD C4 and Xentry Diagnostic Software under 1-year warranty. Autonumen.com  share MB Star C4 SD Connect Reviews from client who purchase from us.

MB Star C4 SD Connect Multiplexer Review:

Review 1: Recently, I got message from other supplier which said offer me best quality Mercedes SD Connect with lower price than you, I check all the same picture as your website even the storage real display. Such a stupid supplier don’t know I have visit Autonumen.com company and storage in China. I know your guys offer good product and service. So I write it down, hope others do not trick by other supplier.

Review 2: SD C4 work perfect for Mercedes Benz Trucks, I‘m foolish to’purchased from other website fake, no after-sales service, no answer. I suggest your client buy the SD C4, they also offer scn online code for high quality sd c4.

Review 3: I only believe SD C4 from Autonumen.com, I have purchase many pcs SD C4 from other website, all bullshit and poor service. Even we know there is no everyone SD C4 China clone 100% work no problem, but obd2tool will offer after-sales service after the sd c4 stop working after 7 months used. Reliable supplier extremely.

Review 4:  I have richly experience for sd connect on ali, all the issue I can handle by alipay, but the after-sales service was boring me. So I try to change my supplier even I know the  sd connect c4 china clone can not avoid all the problem, and i found Autonumen.com, it’s realy reliable partner, not only for quality also the after sales service.

Welcome to write your experience with MB Star C4 SD Connect for Mercedes Benz Star Diagnostics MB SD C4 multiplexer on our reviews.

Leave a comment .
Tags: mb sd c4, MB SD Compact C4, MB SD Connect Compact 4 Star, MB STAR C4, mb star c4 scanner, mb star compact C4 .

How to using Piwis Tester II code Porsche rear end electronics

Posted on October 29, 2019 by wp-admin Posted in Professional Diagnostic Tools .

V18.100 Piwis Tester II Diagnostic Tool For Porsche With CF30 Laptop High Quality

Top 7 Reasons to Get Porsche Piwis Tester II
1. Software Version: V18.100 (Return back the hdd for update,or can update directly, update cost is different according to the QC number,if the last three numbers of your QC mark is 137,hdd cost is70USD,if the last three numbers of your QC mark is 098, hdd cost is 176USD, contact customer sevice for more details )
2. Laptop: CF-30 (Second Hand)—Software is inside the Hard Drive. No need Installation
3. Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Update Method: By HDD (Need to return hard disk to us for upgrade, or you can just buy from us another hdd with newest software) Software contains operating system win XP only. you just need to insert into your computer and use it.
5. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
6. Bluetooth, GPS and Navigation Function are available. But need to pay for the authorization of them.
7. Support Key Programming function, cost 220USD per time (you need consult our customer sevice first with the type and year of your car)

Notice:
1. Please do not take out the hard disk from CF-30 laptop and install on other laptops, it may cause data lose and hard to recovery.
2. Piwis Tester II works with Porsche cars year after 2005
3. when you connect with device,you will get an indication “Found New Hardware Wizard”,make sure you click “next” to continue installing the driver, ortherwise the piwis 2 cannot be recognized by computer
piwis 2 Found New Hardware Wizard

Piwis Tester II for Porsche Functions:
1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis Tester II works with car year after 2005 and latest Porsche cars. It is equipped with the Panasonic laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Piwis Tester II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Leave a comment .
Tags: Piwis 2, Piwis 2 Tester, piwis ii, Piwis Porsche tester, Piwis Tester, Piwis Tester II, Piwis Tester Porsche, Piwis2, Porsche Diagnostic, Porsche Diagnostic Scanner, Porsche diagnostic tool, Porsche Piwis, Porsche Piwis 2, Porsche Piwis ii, Porsche Piwis Tester 2, Porsche Piwis Tester II, Porsche Scan Tool, Test Piwis Porsche .

2017A Version CAT Caterpillar ET Diagnostic Adapter III PLUS DELLd630 laptop

Posted on October 29, 2019 by wp-admin Posted in Heavy Duty Diagnostic .

2017A Version CAT Caterpillar ET Diagnostic Adapter III PLUS DELLd630 laptop (Real Caterpillar ET3 Adapter III)

we will install the software before ship, so you can get it work directly after you receive it.
2017A Cat ET software as Cat Caterpillar ET 2015A Software update version, 2017A Caterpillar Electronic Technician softwarer With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2017.

Cat et Caterpillar Electronic Technician Software 2017A V1.0:
Type of catalogue: Caterpillar Electronic Technician Diagnostic Software
Make: Caterpillar
Region: WorldWide all region
Inclusive languages: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish

CAT ET Software 2017A Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Package :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 Cable (from device to your truck)

Original Factory Caterpillar ET3 Adapter III Compare With OEM Caterpillar ET Diagnostic Adpater III
1. Original Factory Professional Diagnostic Tool CAT ET can use once pluged, no need install the USB drive, the software can automatic realize it for ET3 Adapter, and the machine can automatic weld the high quality Circuit board, quality will be more reliable.

2. The OEM Caterpillar ET Diagnostic Adapter III need use USB Drive to install, and need choose the COM Port, and  in the software ET also need choose ET2 then can be used.

Leave a comment .
Tags: CAT Caterpillar ET, CAT ET, Caterpillar Electronic Technician, Caterpillar ET Diagnostic Adpater III, Caterpillar ET3 .

BEZN C6 OEM DOIP Xentry Diagnosis VCI Multiplexer

Posted on October 22, 2019 by wp-admin Posted in MB Star .

Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Pass thur interfac is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface Benz C6 Overview:

Compatible Software: VXDIAG For XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles
DoIP: Support DoIP
Functions: Star Diagnostic & programming (SCN Coding)
Software version: V2019.9

What is DOIP?

DOIP is ISO 13400 diagnostic protocol

ISO 13400-1:2011 describes the general use cases and communication scenarios which are covered by an Internet Protocol-based vehicle communication standard. Each use case drives specific communication capabilities of the vehicle communication interface, for instance in order to be interoperable in an existing computer network.

The diagnostic communication over Internet Protocol (DoIP) protocol supports the standardized service primitive interface as specified in ISO 14229-2.

The descriptions in ISO 13400-1:2011 cover different application layer implementations, such as:

enhanced vehicle diagnostics (system diagnostics beyond legislated functionality, non-emissions-related system diagnostics);
WWH-OBD (World-Wide Harmonized On-Board Diagnostics) as specified in ISO 27145-2 and ISO 27145-3.

The mercedes  Land Rover JLR all use this new Diagnostic Protocol now.

Where need DOIP device?

when we test mercedes new car like w222  w205

In Audio\Comand section you can find DoIP test page.
If cable is DoIP you will see green mark that DEVICE is Ok.
Xentry will prompt you that other device must carry yellow marks.

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6  Features:

Can be used for all model series of For Mercedes For Benz vehicles
Support DoIP, cover more functions during SCN Coding than SD C4/C5
Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
Diagnosis updates no longer necessary – firmware updates required on rare occasions
Does not need a power supply unit for external power supply
Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 Summary:

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.

The Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.

Notice
1.Please use the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.
2.This Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 can/’t support All Key Lost,needs one key at least.
3. Please note: C4, C5 software cannot be used for this product, this product must be used with our C6 software.

Leave a comment .
Tags: benz c6, BENZ C6 DOIP, MB SD Connect C6, MB STAR C6, Mercedes Benz C6, Xentry C6, Xentry diagnosis VCI .

John Deere Service Advisor EDL V2 Diagnostic Kit

Posted on October 22, 2019 by wp-admin Posted in Professional Diagnostic Tools .

Support Languages: English, French, German, Italian, Portuguese, Russian, Spanish.

John Deere Service Advisor  Agriculture workshop service manual, repair manual, electrical wiring diagram, hydraulic diagram, diagnostic, assembly and disassembly engine, transmission.
John Deere AG Management Solutions, Attachments, Backhoes, Combines and
Headers, Cotton Harvestings, Excavators, ForkLifts, Hay and Forages,
MAte Hand Cut and Shredderses, Plantings and Seedings, Skid Steers,
Sprayers, Sugar Cane Harvesters, Tillages, Tractors, Worksite Pro
Attachments.
John Deere Service Advisor  CF (Construction and Forestry), workshop
service manual, repair manual, diagnostic, electrical wiring diagram,
hydraulic diagram John Deere.
John Deere Service Advisor  CCE (Commercial and Consumer
Equipment)dealer technical assistance, diagnostics, connection readings,
calibrations, interactive tests, specification, tools, assemble and
disassemble presented all models John Deere Construction Equipment and
some models Hitachi, Euclid, Bell and Timberjack.

JOHN DEERE diagnostic adapter for construction equipment, agriculture, engines John Deere.

Leave a comment .
Tags: EDL V2 Diagnostic Kit, EDL V3 Data Link, John Deere Diagnostic Kit, John deere diagnostic software, john deere edl, john deere edl v3, John Deere EDL V3 Adapter, John Deere Service Advisor, John Deere Service Advisor EDL V3 .

BMW ICOM A2+B+C with two different versions

Posted on October 22, 2019 by wp-admin Posted in BMW ICOM .

2014 New BMW ICOM A2+B+C with software (newest version)

2014 New BMW ICOM A2+B+C Diagnostic and Programming Tool without Software,BMW ICOM A2+B+C support BMW cars till 2013 year. Support BMW and MINI full system diagnose and offline programming.

ICOM A2+B+C HardwaVersion:
1.32 ICOM 2
ICOM-PF-CORE 3.10.42
ICOM-Boot: 01.20.00
ICOM-Application: 01.33.00
It supports hardware update later.

ICOM A2+B+C Function:
A2- OBD diagnostic supporting MOST, D-CAN and K-CAN protocols
B – diagnostic via MOST bus, and have connection to A-interface via USB connection.
C – 20-pin cable for old models.

Addtion: The 2014 version BMW ICOM A2+B+C is more stronger than 2013.12 version.

2013.12 Super Version BMW ICOM A2+B+C

2013.12 Super Version BMW ICOM A2+B+C Diagnostic and Programming Tool with Software
Hardware and Software Perfectly Match; Fast running speed; Fully-new Serial Numbers (S/N), work stably;Powerful engineer software.
Support multi-language.

2013 Super Version BMW ICOM A2+B+C Highlight:

1. Latest hardware and software:
ICOM A2 Hardware Version:
ICOM-PF-CORE 3.10.42
ICOM-Boot: 01.20.00
ICOM-Application: 01.33.00

ICOM A2 Software Version:
ISTA-D:3.40.30
ISTA-P:51.2.001
VIN: 2013.11.05
Not connected 9000 days remaining

2. Fast running speed. This version BMW ICOM A2, software running speed increase 30%.
3. Fully-new Serial Numbers (S/N), work more stably. No blacklist.
4. Powerful engineer software: Reflash the hidden function of all BMW AG models, separately program each module,  program and decode for the old parts that need to replace, change Human Machine Interaction (HMI) language (Note: The operator need to be very well qualified-like BMW engineer).
5. Fully support English/Spanish/German/French/Italian/Swedish/Korean/Russian/Portugal/Chinese, diagnose, programming, circuit diagram information are all in full multi-language.

ICOM HDD Features:

1. ICOM HDD includes a bonus engineer software package only provided at our website
2. The HDD has been updated to the newest R2 version, which boasts better efficiency, stability and performance than other R1 version HDDs
3. Different from other websites, we offer you an all new 500GB HDD rather than an old 160GB HDD
4. The hard disk can run on most intel-based computers with 4GB memory

Super Version BMW ICOM A2+B+C Function:
A2- OBD diagnostic supporting MOST, D-CAN and K-CAN protocols
B – diagnostic via MOST bus, and have connection to A-interface via USB connection.
C – 20-pin cable for old models.

BMW ICOM A2+B+C Supported Language:

English/Spanish/German/French/Italian/Swedish/Korean/Russian/Portugal/Chinese (Diagnose, programming, circuit diagram information are all in full multi-language)

System Requirements:
Dual-core processor, it is recommended that the I3 above; More than 4G of memory.

Leave a comment .
Tags: bmw icom a2 new generation, BMW ICOM new generation, bmw icom next, BMW ICOM NEXT A+B+C, icom a2 new generation, New BMW ICOM A2 .

MB SD Connect 5 vs 2017 FVDI2 Commander

Posted on October 22, 2019 by wp-admin Posted in MB Star .

Both MB SD C5 and FVDI II are diagnostic and Programmer tools for Mercedes Benz Cars & Trucks.Then buy Mercedes Benz MB SD C5 or buy FVDI 2 Commander ,which better ? Referred to this question, here,the blog will make a comparison between these two tools,hope it will give you more informations.

About WiFi MB SD Compact 5

Newly MB SD C5 was updated from C4,compared to C4,the new SD Connect C5 with new design and better function and performance. And Car Diagnostic Tools MB SD Connect 5 is specially for Mercedes Benz Cars & Trucks after year 2000.

About 2017 FVDI2 Commander Diagnostic Tool

The 2017 FVDI2 Commander Diagnostic is a professional tool for fully programming your vehiles,see official features below

1. Read identification
2. Read extended identification
3. Read/Clear fault codes
4. Scanning for control units / Clearing fault codes in all control units
5. Display of Actual Values
6. Actuator Tests
7. Reset of control units
8. Control unit adaptations
9. Adjustment of injector injection quantities adaptation for Diesel Engines (CDI-4, CDI-5).

MB SD Connect 5 vs FVDI2 Commander

1.MB SD Connect 5 supports more Languages than FVDI II.

2.MB SD C5 Supports wireless diagnose,while the FVDI 2 didnt.

3.MB SD Connect C5 supports Mercedes Benz Cars After Year 2000,while the FVDI 2 can support Mercedes Benz Smart Maybach.

4. FVDI II Diagnostic Tool comes with a USB Dongle,the MB SD didnt.

5 FVDI II is a professional tool to programmer your vehicles from everysides like Airbag,Programming transponder keys ,Read/Write EEPROM of Dashboard control units and so on.

6. FVDI II Diagnosis can work on more window system than MD Connect C5.

7. 2017 FVDI II is expensive than MD SD C5.

So,if you are looking for a professional tool ,then buy FDVI II,though the price is expensive,yet,the function is powerful.But if you just wanna a tool to programming or flashing your Mercedes Benz,then buy MB SD Compact C5,currently,it is super hot and big welcomed.

See more click:http://www.autonumen.com/

Leave a comment .
Tags: BENZ C5, mb sd c5, mb sd connect c5, MB SD Connect Compact 5, MB STAR C5, Mercedes BENZ C5 .

Xtool x100 pad2 FAQS and the solutions for software cant working

Posted on October 22, 2019 by wp-admin Posted in Car Diagnostic Tool .

Xtool x100 pad2 FAQS and the solutions for software cant working

Xtool X100 PAD2 is the first tablet key programmer in the world! It not only provides customers with professional key programming,but also the most needed special functions for workshop. So someone will have questions for this new released product , lets check the part of questions with answer as bellow :

Q: Will this X100 pad 2 support Indian cars ?

A: No, it doesn’t support Indian cars.

Q:How about 4th 5th IMMO? we also need this function .

A:Yes, this Pad 2 support VW 4th/5th IMMO.

Q:Will x100 pad 2 support 4-System diagnosis?

A:Yes, x100 pad 2 can support 4-System diagnosis.

Q:How can I know the dealer code for this XTOOL X-100 PAD2?

A:Please try dealer code: XT0240

Based on Android system, X100 Pad 2 support easy updating via WIFI, which means you can download the software directly from official website. But when the software have problem , how to do next ? Please check as bellow :

1.Please uninstall the APP from the pad2 first

2.Delete the Xtool file from installation manual

3.Use the application package to install the APP again and check whether it works or not

Any other questions , please dont hesitate to contact us directly any time .

Leave a comment .
Tags: X-100 PAD 2, X-100 Pad2, X100 PAD, X100 PAD 2, XTOOL X-100 PAD 2, Xtool X-100 PAD II, XTOOL X-100 PAD2, xtool x100 pad 2 price, Xtool X100 Pad2, Xtool X100 Pad2 Key Programmmer, Xtool X100 Pad2 Pro .
Next Page »

OBD2 LINKS

OBD2 Scanner
Auto Diagnostic Tools
OBD2 Diagnostic Tools
Car Diagnostic Tools
Auto Scanner Tools
Autocom CDP
Auto key Programmer
Launch X431
Launch CRP123
CK100
BMW ICOM
VCS Auto Diagnostic Tool
ELM Family
Autoboss Tools
Autel Scanner
Heavy Duty Diagnostic Tools
VAG COM
Mileage Correction
MB Star C3
MB Star C4
obd2scantool.us

Recent Posts

  • OBDSTAR X300 DP Plus New update
  • Porsche Piwis Tester II
  • Service Advisor John Deere Software
  • 2018A Version CAT Caterpillar ET Diagnostic Adapter III
  • Original Second Hand V2015.05 Mercedes BENZ C5 SD Connect Xentry Tab Kit Support Online Update

Archives

  • December 2019
  • November 2019
  • October 2019
  • September 2019
  • August 2019
  • July 2019
  • June 2019
  • May 2019
  • April 2019
  • March 2019
  • February 2019
  • January 2019
  • December 2018
  • November 2018
  • October 2018
  • September 2018
  • August 2018
  • July 2018
  • June 2018
  • May 2018
  • April 2018
  • March 2018
  • December 2017
  • November 2017
  • October 2017
  • September 2017
  • August 2017
  • July 2017
  • June 2017
  • May 2017
  • April 2017
  • March 2017
  • November 2015
  • August 2015
  • July 2015
  • June 2015
  • May 2015
  • April 2015
  • March 2015
  • November 2014

Categories

  • Autel Tools
  • Auto key progremmer
  • Auto Repair Software
  • Auto Scanner Tools
  • AUTOCOM CDP
  • BMW ICOM
  • Car Diagnostic Tool
  • Car Repair software
  • ECU Programmer
  • Heavy Duty Diagnostic
  • Launch X431
  • MB Star
  • Mileage Correction
  • Motorcycle Diagnostic Tools
  • OBDSTAR
  • Original brand
  • Professional Diagnostic Tools
  • Uncategorized
  • VAG Diagnostic Tool
  • WOYO TOOLS
  • XTOOL

Pages

  • Sample Page

Archives

  • December 2019
  • November 2019
  • October 2019
  • September 2019
  • August 2019
  • July 2019
  • June 2019
  • May 2019
  • April 2019
  • March 2019
  • February 2019
  • January 2019
  • December 2018
  • November 2018
  • October 2018
  • September 2018
  • August 2018
  • July 2018
  • June 2018
  • May 2018
  • April 2018
  • March 2018
  • December 2017
  • November 2017
  • October 2017
  • September 2017
  • August 2017
  • July 2017
  • June 2017
  • May 2017
  • April 2017
  • March 2017
  • November 2015
  • August 2015
  • July 2015
  • June 2015
  • May 2015
  • April 2015
  • March 2015
  • November 2014

Categories

  • Autel Tools (88)
  • Auto key progremmer (41)
  • Auto Repair Software (2)
  • Auto Scanner Tools (2)
  • AUTOCOM CDP (4)
  • BMW ICOM (38)
  • Car Diagnostic Tool (93)
  • Car Repair software (4)
  • ECU Programmer (2)
  • Heavy Duty Diagnostic (71)
  • Launch X431 (45)
  • MB Star (94)
  • Mileage Correction (5)
  • Motorcycle Diagnostic Tools (3)
  • OBDSTAR (1)
  • Original brand (4)
  • Professional Diagnostic Tools (69)
  • Uncategorized (35)
  • VAG Diagnostic Tool (1)
  • WOYO TOOLS (3)
  • XTOOL (1)

WordPress

  • Log in
  • WordPress

CyberChimps WordPress Themes

© cardiagnostic.us