cardiagnostic.us

Monthly Archives: August 2019

Service Advisor John Deere Software

Posted on by Posted in Professional Diagnostic Tools .

1.What is John Deere Service ADVISOR(SA)?

1.1 John Deere Service Advisor 4.2 System requirements
1.2 John Deere Service Advisor 5.2 System requirements

2 What are John Deere (DTAC) solutions?
3 What is the difference between SA 4.2 and 5.2?
4 Available divisions of Service ADVISOR 4.2
5 Available divisions of Service ADVISOR 5.2
6 Where to buy John Deere Service ADVISOR Online?
7 How to install John Deere Service ADVISOR?
8 Shop John Deere Service ADVISOR

1.What is John Deere Service ADVISOR(SA)?

What is the first step in John Deere tractor repair and maintenance process? Of course, it’s dealer level repair and diagnostic software and hardware package  — John Deere Diagnostics Kit repair and diagnostic kit full version.  Good question: what is john deere service advisor? We got it covered!

JD Service ADVISOR — is windows desktop application and diagnostic adapter kit which allows you: to connect with the vehicle and get maximum possible analysis from the error log, change some factory parameters, connect with the tractor and get maximum reasonable analysis such as:

Read diagnostic trouble codes,
Shift some factory parameters,
Make tests and calibrations,
Program controllers.

From the other hand, JD Service Advisor is a database of repair, technical manuals, diagnosis and test manuals and dealer technician assistance center (DTAC) solutions – DTAC is the way frequently asked questions are answered, and those answers are shared with Deere dealerships. Information that does not get into the current version of a manual or solutions to problems with equipment that needs to be shared with all dealerships is added to DTAC, so technicians have access to the most current information to service Deere equipment.

The second important part of Service Advisor John Deere diagnostic kit is an edl v2 adapter and cables. So you’re able to connect your PC / laptop with installed Service Advisor application to the tractor engine.

2 What are John Deere (DTAC) solutions?

There are two versions of JD Service Advisor available at the moment: 4.2 release – full offline desktop application – support for this version was discontinued in January 2017. System requirements of that version were much lower than for SA 5.2. It comes as Agricultural, Construction & Forestry, Commercial & Consumer, and Power Systems Equipment divisions. Each Division consists of actual models from 2000 release year and historical data from the 1950’s till the 2000 year. John Deere Service Advisor v5.2 is the version that completely replaced SA v4.2 starting 2017 year. Entirely new interface design with bigger system requirements. Currently available in two editions: Agriculture and Turf equipment, Construction and Forestry.

3 What is the difference between SA 4.2 and 5.2?

The main difference is that now SA 5.2 using web browser Internet Explorer instead of application shell which is more convenient for the most users. JD SA 5.2 is fully compatible with Windows 10 including EDL v2 KIT. JD Service Advisor 5 no longer needs DATA DVDs with models data or Historical information. All the files are available on a USB Stick or HDD and can be easily accessed via SA web search. So you no longer need to play with dozen DVDs to be able to get a proper manual or DTAC solution. On that note, I’d like to introduce you JS Service Advisors system requirements.

4 Available divisions of Service ADVISOR 4.2

John Deere Service Advisor 4.2 System requirements:
– O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
– CPU: Pentium/Athlon 1.8 GHz or higher
– RAM: 256 MB of system memory
– Hard Drive: 10 GB of available space
– DVD-ROM(optionally)

5 Available divisions of Service ADVISOR 5.2

John Deere Service Advisor 5.2 System requirements:
– O.S.: Windows 7 Pro/Ultimate; Windows 8 Pro, Windows 8.1 Pro, Windows 10 Pro
– CPU: Any CPU for Windows platform
– RAM: 8 GB of system memory
– Hard Drive: 150 GB of available space

As you can see, the system requirements are significantly different. This information will help you choose in favor of 4.2 or 5.2 version.

Currently, there are four original versions of Heavy Duty Scanner John Deere Service ADVISOR 4.2 application:
John Deere Service Advisor 4 (4.2.005) Agricultural Equipment,
Construction & Forestry Equipment,
Commercial & Consumer Equipment,
Power Systems and OEM Engines

6 Where to buy John Deere Service ADVISOR Online?

The last update of these products was in June 2016.
Here are some screenshots showing what Service Advisor by John Deere diagnostic software looks like:
john deere service advisor 4 manuals engine section
23.1

The new version of Service Advisor comes in two editions:
John Deere Service Advisor 5.2 2017 Agriculture and Turf Equipment Division
John Deere Service Advisor 5.2 2017 Construction and Forestry Equipment.

Where to buy john deere service advisor Online?
All mentioned versions are listed below. You can purchase John Deere Service Advisor using our website. During the checkout process, you will be given a few delivery options and two most convenient payment methods – credit card using PayPal gateway and Bank transfer (please contact us if you need proforma invoice). We ship worldwide and accept PayPal so you can shop with confidence!

7 How to install john deere service advisor?

One of the common questions we receive from our clients is how to setup and activate john deere service advisor after purchase and download onto the PC/Laptop? The short answer – we set up and activate it remotely, using Teamviewer.Service ADVISOR is a vast and very complicated application. It’s enough to say that total file size of the Service Advisor is about 50 Gb for v4.2 and 110+ GB for v5.2. The SA supplied as a set of 10 Dual layer DVDs or ISO images in case of v4.2 and on USB HDD for v5.2.
In most of the cases, we re-install the servicer advisor all over again after our customer did to fix his mistakes. To avoid any inconvenience, we recommend using our free remote assistance service with the setup and activation.

8 Shop John Deere Service ADVISOR from OBD2TOOL

If you feel as computer expert or IT technician we can provide you with the step by step installation guide. It covers pre-setup instructions such as set compatibility settings for program components like MS SQL Server 2005, “.NetFramework” and Windows system settings. Also, there is some troubleshooting guide in case of numerous issues during the installation process.

Porsche Piwis Tester II

Posted on by Posted in Professional Diagnostic Tools .

Porsche Piwis Tester II with CF30 Laptop ( Life-time Chargeless Upgrade )
Porsche Piwis Tester II is the latest able tester, the a lot of poweful analyze and offline programming apparatus for Porsche, with latest tester for Porsche, able functions, abounding access.
Porsche Piwis Warm Tips:
Second-hand laptop CF30, 90%-95% new;
New software is continuously provided, accepted adaptation is V14.3500;
Requires ONLINE modules: (F BCM R BCM DME ELV SRS KEY).
Top 9 Reasons to Get Porsche Piwis Tester II:
1. Software Version: V14.350 ( Life-time Chargeless Upgrade )
2. Laptop: CF-30 (Second Hand)—Software is central the Hard Drive. No charge Installation
3. Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Amend Method: By CD or HDD (One Year for Free, It can not be adapted online. 200USD for one time amend afterwards one year.)
5. Software contains operating arrangement win XP only. you just charge to admit into your computer and use it.
6. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
7. Porsche Piwis Tester II Software Chargeless Download (American Server)
8. PPN online account is available(key programming,etc),service amount is not included
9. Bluetooth,GPS and Navigation Function are available. But you charge to pay for the approval of them.
Porsche Piwis Tester 2 Functions:
1. Read/clear absurdity code, bolt abstracts stream, computer programming match, basal test, aliment advice consult, apparatus website drawing, base diagram.
2. Porsche Piwis Tester II works with the old and latest Porsche cars. It is able with the Panasonic laptop and aboriginal software for the test. Porsche Piwis Tester II can advice you analyze and affairs the a lot of new and old affectionate of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can alone be diagnosed by application Porsche Piwis Tester II. Based on accepted activity planning, all beforehand car models will gradually be afflicted over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I accept to be acclimated for beforehand models in the Porsche branch until end of 2010.
4. Support for Porsche. Piwis Tester I will no best be accessible already the beforehand analytic programs accept been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will accommodate one basal section of software. This is all-important in adjustment to alpha and configure the tester.
Porsche Piwis II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Aboriginal antitheft System,KEYLESS GO system, OBDII system.

MB SD C4 Firmware Update Manual

Posted on by Posted in MB Star .

1. Prepare 6 common AA batteries of 5. Then install the battery by following the Manual of How to Install Battery for MB SD C4. (Notes: The batteries need to be new with fully charged.)
13.1
2. Connect the MB SD C4 interface with the computer by green cable. Then use the OBD cable to connect the MB SD C4 interface with car. If can not connect car, please use the OBD 12V power supply to take place of car.
3. Open the DAS software. Then check those 3 files Update_automatic, Update_manual, Update_Special from the C:\programm files\SDconnect Toolkit. If the name of the file is not right, please correct it.
13.2
4. Restart the computer.
5. Start to update MB SD C4 firmware by following ” MB SD C4 Firmware Update Instruction”.
If there is any problem, please feel free to contact me by sale@dasobd2.de
More details, please check on:

https://www.autonumen.com/goods-335-MB+SD+Connect+Compact+4+Star+Diagnosis+Tool+Plus+Dell+D630+Laptop+Latest+Version.html

Focus On OBD Tool Since 2008

Wechat/WhatsApp:(+86)15815514521

Email:service@autonumen.com

Website:www.autonumen.com

​

Top 3 reasons to get Caterpillar ET 2015A

Posted on by Posted in Heavy Duty Diagnostic .

2015A Cat ET software as Cat Caterpillar ET 2015A Software update version, 2015A Caterpillar Electronic Technician softwarer With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2017.
8.1
1. Latest Caterpillar ET Software to work with CAT/CAT3 Truck Scanner
2. With one free activation, can send software online
3.Support Multi-languages

2015A Cat et Diagnostic Software PC Requirements:
Recommended Configurations:
PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of available hard disk drive
DVD-ROM drive
15.4 inch XGA Screen (1280×1024 compatible)
Microsoft Windows
7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 9 or newer is recommended.

Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.

Caterpillar ET 2017A Electronic Technician Diagnostic Software[01/2017]

Caterpillar ET Software 2017A Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application

LONSDOR K518S Auto Key Programmer same as Lonsdor K518ISE Key Programmer and car list

Posted on by Posted in Auto key progremmer .

Lonsdor K518S  Key Programmer:

1.Support language: English

2.Update: One key update online ;  No Need Token for all cars

3.Support  Immobilization Key Programming, dometer adjustment

4.Built-in-in Volkswagen 4th & 5th adapter

5.Built-in Chip & remote detection module.

6.Support car list : http://en.lonsdor.com/html/function

7.Free BMW FEM key programming

8.K518S key programmer is the latest version of Lonsdor, with wider vehicle coverage in key programming, it is customized as the first masterpiece to the overseas market from Lonsdor.

With months of preparation and rigorous testing, from the software design to the user experience, it is an epitomize of Lonsdor years of industry experience.

Highlight:

1.Lonsdor K518S is a key programmer for all makes from Europe, America, Asia and China.

2.It can also support odometer adjustment for some makes.

3.Its nice features are built-in Volkswagen 4th 5th adapter & RFID transponder reader / writer

4.Program Toyota/Lexus smart key all key lost via OBD

5.Free BMW FEM key programming (for all keys lost, enter 32-bit ISN code).

6.Lonsdor K518S is specialized on Volvo, Maserati, Ferrari, Lamborghini, Bentley, Nissan etc.support Astra H programming

K518 S key programmer Function Description:

Please pay attention to below function description before using the device.

1.Immobilization: immobilizer system diagnosis

2.Odometer adjustment: mileage diagnosis and correction

3.Hardware testing: test if the hardware can function well

4.Adapter: after dismantling, diagnose certain car models

5.Setting: set up basic device information

6.Update firmware: adapter firmware upgrade & update (connect KPROG adapter

7.with OBD test cable and connect K518S with 12V power supply)

8.One key upgrade: click to update to the latest system data

9.Shutdown – turn off the device

Cars coverage list for immobilization:

Europe:Audi, BMW, Benz, VW, Volvo, Citroen, Ferrari, Maserati, Fiat, Lamborghini, Jaguar, MG,

Land Rover, Bentley, Lancia, Opel, Peugeot, Porsche, DS, Renault, Alfa Romeo, Smart,

Borgward

America:Cadillac, Chevrolet, Dodge, GMC, Buick, Hummer, Ford, JEEP, Lincoln, Mercury

Asia:Honda, Hyundai, Isuzu, KIA, Lexus, Mazda, Mitsubishi, Nissan, Ssangyong, Subaru, Suzuki,

Toyota, Shigaoka Queen

China:Iveco, Trumpchi, BYD, Geely, Chery, Great Wall, Young Lotus (Basically all Chinese car

models are included)

Odometer Adjustment Car List:

VW, Porsche, Ford, Jaguar, Land Rover, Mazda, Audi, Renault, Hummer, Hyundai, Kia…

Note: more high-end cars will be updated very soon.

Note: K518S is still under rapid upgrading, more functions and be released soon, please refer to our website www.autonumen.com foalso you can “One key update” for the latest version by yourse

MB Star C5 Xentry Connect Mercedes Benz SD Connect C5 Enhanced than Mercedes sds C4 scanner

Posted on by Posted in MB Star .

Benz Diagnostic Tool MB Star C5 Xentry Connect is Mercedes Benz Star diagnosis mb c5. Given that the upgraded version of Mercedes c4 multiplexer, the Mercedes Benz SD Connect C5 is additionally a bit bit diverse. Autonumen MB Star C5 Xentry Connect Mercedes Benz SD Connect C5 Enhanced than Mercedes sds C4 scanner.

In comparison towards the Mercedes c4 multiplexer, autonumen.com MB Star C5 Xentry Connect has been improved a lot, in order to stay away from some accidental problems which ordinarily occur to Mercedes sds C4 scanner for the duration of use. Like the crashes brought about by the overheat within the interface of your detection tool. Aside from that, other principal capabilities are frequently the identical with C4.

Autonumen is one of Mercedes program program for Star diagnosis, and outstanding for finishing up servicing and repair function. A number of MB proprietors get there at check with it continuously and also a number of wish to purchase it independently, but right here we autonumen.com provide you with it in the much more cost-effective usually means, specifically for Mercedes entrepreneurs. it might be autonumen.com MB Star C5 Xentry Connect, new solution for benz. some concerns folliwing might help lean a lot more about mb star c5.

Wifi MB SD Connect C5 from autonumen.com is latest wi-fi Mercedes BENZ Diagnostic Program mb sd connection c4 update model. Mercedes Star prognosis C5 multiplexer supports learning out & erasing trouble code,looking through the real-time data of sensor and actuator, coding and programming. Wifi MB SD Hyperlink compact 5 is MB SD Join C5 star diagnosis multiplexer. MB star C5 Xentry Link assistance Mercedes Benz Cars After Year 2000. WIFI MB sd hook up c5 mux from AUTONUMEN is the latest mercedes benz sd join compact 5 diagnostic instrument. MB SD Hook up C5 guidance K-line, can bus and usd protocols. MB sd hyperlink c5 aid Offline and Online Programming, If You Choose to Do Online, Please Buy Online SCN Coding Service.

GM Tech 2 works with Hummer Yes or No

Posted on by Posted in Professional Diagnostic Tools .

This is about GM Tech 2 scan tool for Hummer troubleshooting and programming.

Can I have a cheap Tech 2 for Hummer?
Yep. Both the original and HQ clone can work for your car.

Where can I get a working clone at a good price?

https://www.autonumen.com/goods-6947-GM-MDI-2-Diagnostic-Tool-Multiple-Diagnostic-Interface.html

Why my Hummer is not shown in the GM vehicle list?
That little short list is incorrect and only shows a few of the earlier than 2007 CAN bus vehicles.

Tech 2 clone for both troubleshooting and programming Hummer?
I’ve used my Tech2 on my 08 many times for troubleshooting not programming
But I think it should be able to program Hummer.

Anyone has good success of Hummer H3?
My H3 has had a CEL on – po452. I checked it with the tech 2. Well it pulls 3 codes, po455 (large evap leak), po442 (small evap leak), and po449 (vent solenoid control).

Tech 2 is possible to program for Hummer H2 above the year 2007… what to do in that case?

Actually it does the programming just fine on newer than 2007 GM vehicles BUT you must pay for an ACDelco TDS subscription for vehicles above 2007 and you would use the CANDI module that comes with many of the Tech2’s for working with CAN bus vehicles. You can subscribe for it.
This is ONLY needed if you want to program or update the software in a module. ALL of the build in diagnostics and testing for vehicles up to 2013 works without the subscription or the older TIS2000 software. You only need those for doing actual programming. The older TIS2000 software – that is what has the programming was discontinued in 2007. TIS2000 does have the actual programming for all vehicles up to 2007. After 2007 GM went to the TDS system.
You can also get a newer style MDI or MDI 2 for diagnostics and programming. The catch with those. They have NO screen or built in software and you must pay for a subscription from from ACDelco TDS to use an MDI.
Other brand units, a very select few can do actual programming and use the pass-through method. NONE have the diagnostics that the actual Tech2 scanner or GM MDI Scan Tool (with the subscription) will have. Check with Autel and see if they have the full diagnostics and re-calibration for the rear air suspension on a Hummer H2. Not going to happen, there is too little demand for them to hack and reverse engineer that particular bit of code in a Tech2 to figure out the diagnostics and then write programming for that for their tool.

18.1
18.2

BMW ICOM Next VS. BMW ICOM A2,Which is Better?

Posted on by Posted in BMW ICOM .

From Autonumen.com BMW ICOM NEXT is the latest generation of BMW ICOM A2.Do you know what is the difference between and which to choose ? Bellow there are some specific information of ICOM A 2 and ICOM NEXT to help you tell the difference.
BMW ICOM NEXT BMW Diagnostic Tool ICOM NEXT A+B+C
13.1
BMW ICOM BMW Ista BMW Scan Tool
13.2
Both ICOM A2 and ICOM Next A can work with the same software ISTA-D ISTA-P for the same BMW vehicles. But they are kind of different from some aspects, especially firmware adaption. Here is some highlights of ICOM NETX after hardware update with high-quality PCB:
13.4
more stable during programming
be necessary for the future Gbit cars
faster start-up times and high throughput
through high-performance, low-power ARM SoC
improved handling
more flexible OBD cable
lighted button for logs
13.5
13.6
13.7
More detail about ICOM NEXT BMW diagnostic tool,pls connect

Why Launch X431 PRO MINI Bluetooth better than Diagun 3

Perkins EST (Electronic Service Tool) 2018A 2015AFree Download

Posted on by Posted in Car Diagnostic Tool .

What is Perkins EST?

Perkins EST is a diagnostic software which consists of a set of hardware and a software (The Integrated Parts and Service System or “TIPSS”) interface kit, which an user can use to communicate with Perkins’2300/2800 electronic engines (FG Wilson 300 – 750 KVA range) and FG Wilson Powerwizard control panels. This communication is established via a J1939 data link.
3.1
Perkins EST Function List:

Override Powerwizard level three passwords
Configure and/or change system parameters
Display, graph and record logs of parameter status
Display the status of a group of parameters (temperatures, pressures, etc)
View and clear active and logged diagnostic codes
View and clear active and logged event codes
Display, view or change the current Configuration File or Base level Flash File
Upload, download and save configuration files
View a list of irregularities logged by the ECM (engine control module)
Perform diagnostic tests
Perform calibrations
Print reports and diagnostic results.

Car Diagnostic Tools Perkins EST Features:

1.Facilitating the troubleshooting of electronic engines.
2. Essential in replacing an ECM on a Perkins’ 2300/2800 series engine.
3.Replacing or retrofitting an FG Wilson Powerwizard control panel module – the new standard in FG Wilson control systems. A blank module can only be configured using EST (installing the base flash file into a blank Powerwizard module).
4.Upload, download, and save configuration files,bypassing Powerwizard level three passwords.
5. Update Powerwizard control panels version as required.
6.Additional Powerwizard language files as required.

Perkins EST Support Languages:

English,Chinese,Danish,French,German,Italian,Portuguese,Spanish

Perkins EST Installation Requirements:

– O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
– CPU: Pentium/Athlon 1.8 GHz or higher
– RAM: 256 MB of system memory
– Hard Drive: 500 MB of available space
– DVD-ROM