cardiagnostic.us | Monthly Archives: April 2019

How to Install Cummins Adblue Emulator

Posted on April 22, 2019 by wp-admin Posted in Original brand .

This Cummins adblue emulator could be used to disable SCR system for Cummins trucks. As a plu-in device, it is truly user-friendly. But how to install this device ?

Today, autonumen.com would like to share this installation guide with our customer.

1, Before installation, please switch off the ignition for the Cummins truck.

2, Replacing the dosing dump as shown in the picture.

3, Insulate the connector of the dosing pump and let dosing pump to be idle socket.

4, After the above steps, check the level indicator.

5, Disconnect the nox sensor connector and connect the AdBlue emulator.

6, Switch on the truck, if there is no error message in the dash lights of the truck, then whole installation is completed.

How to update Nexiq firmware with John Deere SA

Posted on April 22, 2019 by wp-admin Posted in Professional Diagnostic Tools .

When I was doing experiments with my Nexiq clone (also called Xtruck) and John Deere Service Advisor(JDSA)…

Running the utility binload from the folder C:\Nexiq\Test.
Set checkbox – Enable automatic USB-Link firmware upgrade
and get firmware bin file.
Save original bin with other name (for recovery).

I copy the firmware bin from the program John Deere SA,
rename as original Nexiq bin name
and replace original – by that file.

Next, again start utility binload from the folder C:\Nexiq\Test
and have John Deere SA firmware in Nexiq.

I have test connection with 2CAN pin and read engine serial
but i don’t run program…
I could not do normal work program…

JDL adapter like Nexiq adapter…
In Nexiq new driver have new firmware version
I always update firmware and do not have problem…
Credits to Dmitry in the MH community

Chrysler FVDI2 ABRITES Commander For Chrysler/Dodge And Jeep V3.3

Posted on April 22, 2019 by wp-admin Posted in Motorcycle Diagnostic Tools .

Chrysler FVDI2 ABRITES Commander For Chrysler/Dodge And Jeep V3.3

Chrysler FVDI2 ABRITES Commander is a software intended for learning of keys and Mileage Recalibration of these vehicles.

Basic diagnostics of all control units, including, but not limited to Engine, Instrument Panel Cluster, Skim, Electronic Transmission Control.

Pin code extraction from SKIM dump for older vehicles.which are not supported by any other diagnostic tool.

Top 4 Reasons to Get Chrysler FVDI2 ABRITES Commander:

1. Software Version: V3.3
2. Languages: English, German, Spanish, French, Portuguese, Russian, Italian, Danish, Czech, Bulgarian, Croatian, Greek, Hungarian, Polish, Romanian, Slovenian, Swedish, Turkish, Brazilian
3. Buy Chrysler/Dodge software get Hyundai/Kia/Tag Key Tool software free, besides you can get free 20 digit Nissan Pin Code Calculator software too
4. Our FVDI2 Chrysler Can Not Support Vehicles of J1850 Protocol unitl now

Notice:
Support Computer System: Windows XP

How to connect FVDI
When obtaining authorization, operate by following the next steps:

Step 1. Connect the Softdog to FVDI2. Do not connect Softdog to the computer, otherwise the Softdog green light or red light will on, and result in authorization fail.

Step 2. Use USB cable to connect FVDI2 and the computer, but do not connect FVDI2 to the car. Wait until FVDI2 green light on and Softdog red light on, you succeed getting authorization. If FVDI2 red light on or Softdog green light on, repeat the above steps.

After get authorization for FVDI2, follow the next steps to connect.

Step 1. Connect the Softdog to FVDI2 (Note: do not connect Softdog to the computer).
Step 2. Use USB cable to connect FVDI2 and the computer. Wait until FVDI2 green light on and Softdog red light on, connect Softdog USB cable to the computer. During the procedure, the Softdog red light keeps on (Note: do not connect FVDI2 to the car)
Step 3. Till the above 2 steps work well, connect FVDI2 to the car.

Standard Diagnostic Functions:

1.Connect to the devices using KWP2000 and UDS over ISO transport protocol (CAN)
2.For all electronic control units reading identification and extended identification information
3.For all electronic control units read errors (DTCs)
4.For all electronic control units clear errors (DTCs)
5.Output tests
6.Control unit adaptations – Seatbelt Warning Enable/Disable, Change mileage display between miles and kilometers and so on
7.Actual values display
8.Scan all units
9.Clear all DTCs

The key learning function works by CAN and J1850. Please, see below the list of supported vehicles. In the next versions we will add more vehicles to this list FREE for all customers who own the key learning function. Since version 2.3 we have added support for J1850 vehicles.
Owners of the Chrysler Key Learning special function can read and write the FULL EEPROM of the Immobilizer control unit.

Launch Icarscan comparison with Launch M-diag and Launch Easydiag

Posted on April 22, 2019 by wp-admin Posted in Launch X431 .

As we all know , there have many types of obd connectors from Launch , but whats the difference ? So we made a comparison for our Launch icarscan with Launch M-DIAG and EASYDIAG .1 icarscan

First , Launch icarscan is the FULL systems diagnosis tool much more powerful than Launch X431 Easydiag and M-diag. It’s not only excels for diagnosis but also for special functions.

1.I/M Readiness Monitor

2.Read DTC’s

3.Clear DTC’s

4.Read Freeze Frame Data

5.Read and Graph Data Stream PID’s

6.Full System Scan

7.Actuation Tests

8.can program and code the electronic control system of prevailing vehicle models

Please refer to the comparison picture as bellow :

Launch ICARSCAN better than X431 idiag,Easydiag ,M-diag.

New ICARSCAN Perfect Replacement for LAUNCH X431 idiag , contain all function of obd2 code readers. ICARSCAN work better and run faster than X431 idiag ,easydiag and m-diag. This is a Intuitive interface and easy to use.

More details for our icarscan , welcome to check on www.autonumen.com

Thank you

WIFI CAT ET III Adapter Caterpillar ET3 New Arrival

Posted on April 22, 2019 by wp-admin Posted in Heavy Duty Diagnostic .

The old bluetooth Caterpillar ET3 Adapter III has stopped production, and you may get the new WIFI Auto key Programmer CAT ET III diagnostic adapter to replace it, autonumen.COM has WIFI CAT ET III Adapter Caterpillar ET3 New Arrival.

WIFI Caterpillar ET3 Adapter III 317-7485 CAT ET III Diagnostic

CAT Communications Adapter III 317-7485 is the newest generation in the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.This function is needed for some CAT ET (Electronic Technician) functions.

True 2015A Caterpillar ET3 Adapter III P/N 317-7485 Experienced Diagnostic Adapter for CAT with WIFI

This is the only suggested communication device for CAT, plus the only datalink device that may enable you to appropriately communicate using a CAT engine on dual datalinks.

Software version: 2015A

2015A Caterpillar ET3 Adapter III Communication:

1. Enables communication involving service tools and engine controls employing several data links just like J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;

2. Flash plan allows adapter firmware upgrades as further functions become out there;

3. Utilizes J1939/11, high-speed data hyperlink (part of ADEM III controls), substantially reducing flash times;

4. Automatically selects J1939/11 when flashing the engine (reduces the flash time roughly 80%, from 14 minutes to three minutes).

When you are searching for wireless diagnostic interface for cat engines, please it is possible to opt for this new WIFI CAT ET III adapter on www.autonumen.com , and also you will get 5% off discount when you order it now.

Autel MaxiSys Pro MS908P

Posted on April 16, 2019 by wp-admin Posted in Autel Tools .

Autel MaxiSys pro MS908P is an evolutionary smart solution for specialized automotive diagnosis and ECU programming. Designed with the DNA of Autel’s diagnostics family, the MaxiSys is built to offer many of the prestigious qualities of the MaxiDAS DS708 with extreme ease of use and powerful diagnostic performance.

Autel MaxiSys Pro Description

TheMS908 PRO has been designed to be the go-to tool for the professional technician who performs J-2534 reprogramming on a regular basis.MaxiSYS Pro utilizes an ultra-powerful A9 quad-core, 1.40GHz processor that offers a 50% increase in speed versus competing products, a 9.7” LED screen with a 1,024 x 768 resolution capacitive touch screen, a 32 GB Solid State hard drive, the revolutionary multitasking Android Operating System and comprehensive OE-level vehicle coverage.

The MaxiSYS Pro includes the J-2534 reprogramming box and special MaxiSYS? Pro software needed for shops and technicians who demand a comprehensive diagnostic system capable of completing even the most complicated and demanding tasks.

The MaxiSYS Pro comes with all of necessary adaptors for 1996 & newer vehicles, software for Domestic, Asian, & European vehicles (J-2534 manufacturer updates sold separately) and cables needed to get the job done, as well as one year of FREE updates.

Autel MaxiSys Pro MS908P J2534 adapter

Autel MaxiSys Pro Hardware
* Extraordinarily powerful Cortex-A9 quad-core processor
* 9.7” 1,024×768 LED-backlit glossy Multi Touch capacitive display with IPS technology
* Internal reliable and fast 32GB Solid State Drive for better performance
* Built-in 5-megapixel rear camera with autofocus and flashlight
* Dual-band (2.4 GHz & 5.0 GHz) 802.11n Wi-Fi to access your favorite web resources
* Unique shop tough ergonomic design features strong rubber protection and housing;
* Built-in rechargeable lithium-ion battery for up to 8 hours of continuous operation
* USB, audio and auxiliary ports make it easy to connect accessories
* The VCI connects wirelessly to the main unit with Long-Range Class 1 Bluetooth

Autel MaxiSys Pro Software

* Open source Android Operating System for fast boot-up and multitasking
* Easy and intuitive navigation makes finding what you need simple and fast
* Extensive vehicle coverage for more than 40 US, Asian and European vehicle makes
* Complete function capability for codes, live data, actuation tests, adaptations, coding, and even ECU programming
* Displays live data in text, graph and analog for easy data review and analysis
* Configure live data display options, set alarms, record, and playback data frames with one touch
* Records and playbacks live data to pinpoint troubles of sensors and components
* Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes
* Remote technical support for convenient demonstration, training and increased customer satisfaction
* Prints out recorded data anytime and anywhere with Wi-Fi technology
* Automatic Wi-Fi updates available in new software releases

MB Star C5 Xentry Connect Mercedes Benz SD Connect C5 Enhanced than Mercedes sds C4 scanner

Posted on April 16, 2019 by wp-admin Posted in MB Star .

Benz Diagnostic Tool MB Star C5 Xentry Connect is Mercedes Benz Star diagnosis mb c5. Given that the upgraded version of Mercedes c4 multiplexer, the Mercedes Benz SD Connect C5 is additionally a bit bit diverse. Autonumen MB Star C5 Xentry Connect Mercedes Benz SD Connect C5 Enhanced than Mercedes sds C4 scanner.

In comparison towards the Mercedes c4 multiplexer, autonumen.com MB Star C5 Xentry Connect has been improved a lot, in order to stay away from some accidental problems which ordinarily occur to Mercedes sds C4 scanner for the duration of use. Like the crashes brought about by the overheat within the interface of your detection tool. Aside from that, other principal capabilities are frequently the identical with C4.

Autonumen is one of Mercedes program program for Star diagnosis, and outstanding for finishing up servicing and repair function. A number of MB proprietors get there at check with it continuously and also a number of wish to purchase it independently, but right here we autonumen.com provide you with it in the much more cost-effective usually means, specifically for Mercedes entrepreneurs. it might be autonumen.com MB Star C5 Xentry Connect, new solution for benz. some concerns folliwing might help lean a lot more about mb star c5.

Wifi MB SD Connect C5 from autonumen.com is latest wi-fi Mercedes BENZ Diagnostic Program mb sd connection c4 update model. Mercedes Star prognosis C5 multiplexer supports learning out & erasing trouble code,looking through the real-time data of sensor and actuator, coding and programming. Wifi MB SD Hyperlink compact 5 is MB SD Join C5 star diagnosis multiplexer. MB star C5 Xentry Link assistance Mercedes Benz Cars After Year 2000. WIFI MB sd hook up c5 mux from AUTONUMEN is the latest mercedes benz sd join compact 5 diagnostic instrument. MB SD Hook up C5 guidance K-line, can bus and usd protocols. MB sd hyperlink c5 aid Offline and Online Programming, If You Choose to Do Online, Please Buy Online SCN Coding Service.

How to Restore BMW ICOM Next in 12 steps

Posted on April 16, 2019 by wp-admin Posted in BMW ICOM .

How to Restore BMW ICOM Next? This post will show an obd2eshop customer’s solution to BMW ICOM Next restore when you has red LEDs turn on issue when running firmware upgrade. In order to solve your incident, please apply the following 12 steps:

Note: DO NOT UNPLUG the BMW ICOM Next emulator from the {OBD II} jack after an update via {ISTA}, a web interface or an emergency software update.

The {ICOM Next} starts with flashing green SYSTEM {LED}s. After about 10 seconds it shows red {LED}s for about 2 minutes. After this, the {ICOM Next} reboots due to a firmware update.

If the {ICOM Next} {LED}s remain red for more than 10 minutes, or if the {ICOM Next} is unplugged directly after an update, please carry out the following procedure:

1. Please ensure that ALL of the following prerequisites are satisfied:

1.1. You require a USB 2.0 or USB 3.0 flash drive. {USB 1.x flash drives are not supported).

1.2. The USB flash drive must be formatted with a FAT32 file system.

1.3. A minimum of 60 MByte free space is required on the USB flash drive.

2. Navigate to “C:\ProgramData\BMW\ISPI\data\TRIC\ICOMNext\ICOM-Image-03-14-08”.

ProgramData folder is hidden by default. In that case, you have two options in order to access the file or the folder:

– change the settings directly in the Windows Explorer (“Tools => Folder Options => View => Show hidden files, folders or drives”)

– or enter the whole path into the Windows Explorer’s address bar and press enter.

3. Copy “{ICOM_Next-rootfs-010002.tar.gz}” to the root directory of the {USB} flash drive.

4. Copy “{ICOM_Next-app-010008.tar.gz}” to the root directory of the {USB} flash drive.

5. Disconnect the {ICOM Next} from the power supply.

6. Plug the {USB} flash drive into the {ICOM NEXT}.

7. Press and hold the button pressed on the {ICOM Next} and connect the {ICOM NEXT} to the {OBD II} jack of a vehicle.

8. Keep the button pressed. The {ICOM NEXT} starts with all {LED}s glowing red. The {LED}s stay red; some may flicker orange/yellow. Keep the button pressed.

9. Keep the button pressed. After about 4 seconds, all {LED}s turn orange/yellow. All {LED}s now glow in the same colour.

10. Release the button and then press it three times within five seconds. The {LED}s glow or flash red and orange/yellow again.

11. Wait: This procedure may take several minutes. Do not disconnect the {ICOM NEXT} as long as any {LED} glows red.

12. After about 5 minutes the SYSTEM {LED} turns green again. The {ICOM NEXT} has been updated and is ready for use.

IMPORTANT: When the software update is complete, the {ICOM NEXT} needs to be connected to the dealer’s network in order to be reconfigured.

All previous settings are lost during the update. If there is a “{user.settings}” file on the {USB} flash drive, it will be applied after the firmware update.

Porsche Piwis Tester II V15.6 with CF30 Laptop or Lenovo E49AL Laptop

Posted on April 16, 2019 by wp-admin Posted in Professional Diagnostic Tools .

Some of my customers let me recommended which auto diagnostic tool is good for Porsche , I recommend Porsche Piwis Tester ii for all of you who also have any request. By the way , we have a big promotion for it on this month , you can buy it with laptop , only need USD1188/set .

Piwis Tester II is the latest professional tester for Porshe,the most poweful diagnose and offline programming tool for Porsche,with latest tester for Porsche,powerful functions,full access .The latst software of it is V15.6 ,and can support multi-language , sucha as : Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch .

The systems which it can support as following :
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Please check the FAQ for Porsche Piwis Tester II as bellow :
Q1: How to accomplish Porsche Piwis Tester II online function?
A1: Porsche Piwis Tester II online is via Team Viewer remote control, globally available.

Q2: How to handle with 90 days locking about Porsche Piwis Tester II?
A2: Porsche Piwis Tester II timing is unlimited, always showing 90 days.

Q3: How much software update charges for per year?
A3: The first year software update fee is free.

Q4: How to update Porsche Piwis Tester II?
A4: By CD or HDD. When you want update. you can contact with our customer service as well

Q5: If it is showing Porsche Logo when booting computer?
A5: Yes, CF-31R, CF30K are with Porsche Logo when booting computer.

Q6: License Validity?
A6: To support ONLINE function, valid certificate must be available for Porsche Piwis Tester II.

Q7: Where could get Laptop Power-on Password?
A7: Normally ours is piwis-3456, or piwis-4567. Or you can see the stickers on laptop. (Attached pic shows). If there is any problem, can contact customer service freely.

Now , how is your opinion for our porsche piwis tester ii ? Welcome to contact us any time .

Nexiq 125032 USB Link Interface with All Adapters Wireless Connect Bluetooth version

Posted on April 16, 2019 by wp-admin Posted in Autel Tools .

Nexiq 125032 USB Link Interface with All Adapters

We’d like to suggest that the new type Nexiq 125032 USB Link interface to you , this model have the function of wireless connect and bluetooth . it with the best price USD290 per set , without leather suitcase . If you need the leather suitcase for protection , you just need pay more USD15 . And make the order for A209-2 .

2015 New Bluetooth version Nexiq 125032 USB Link Diesel Truck Diagnostic Interface with All all adapters and cables. Bluetooth NEXIQ 125032 support link computer to vehicle wireless connect. Nexiq 125032 can work with many kinds of heavy duty, trucks, engines and transmissions, brakes and more, minimizing your investment in multiple brand-specific diagnostic.

Bluetooth NEXIQ 125032 USB Truck diagnosis:
1.Support bluetooth wireless connection.
2.Compatible with multiple software applications
3.For Hino, Perkins, Volvo, Cat, Nissan software,only XP system.Other software can be installed on XP or WIN7 32bit.
4.When you change time of your laptop, Cummins Inline software will get locked, please download the attached file “how-to-unlock-cummins-inline” to solve it.
5.After-sale warranty:One year.

Do you have any interesting for this item ?Or do you need any other auto diagnostic scanner ? If so , welcome to autonumen.com . Thank you .