cardiagnostic.us | Category Archives: Heavy Duty Diagnostic

2018A Version CAT Caterpillar ET Diagnostic Adapter III

Posted on December 2, 2019 by wp-admin Posted in Heavy Duty Diagnostic .

We will install the software before ship, so you can get it work directly after you receive it.
2018A Cat ET software as Cat Caterpillar ET 2015A Software update version, 2018A Caterpillar Electronic Technician softwarer With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2018.

Cat et Caterpillar Electronic Technician Software 2018A V1.0:
Type of catalogue: Caterpillar Electronic Technician Diagnostic Software
Make: Caterpillar
Region: WorldWide all region
Inclusive languages: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
Caterpillar ET Software 2018A Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Package :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 Cable (from device to your truck)
Original Factory Caterpillar ET3 Adapter III Compare With OEM Caterpillar ET Diagnostic Adpater III
1. Original Factory CAT ET can use once pluged, no need install the USB drive, the software can automatic realize it for ET3 Adapter, and the machine can automatic weld the high quality Circuit board, quality will be more reliable.
2. The OEM Caterpillar ET Diagnostic Adapter III need use USB Drive to install, and need choose the COM Port, and in the software ET also need choose ET2 then can be used.

Package 1 :

1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 9PIN Cable (from device to your truck)
5.6PIN Cable (for old truck)

Package 2:
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 9PIN Cable (from device to your truck)
5.6PIN Cable (for old truck)
6.14PIN Cable(for new truck,optional)

WIFI CAT ET III Adapter Caterpillar ET3 New Arrival

Posted on November 25, 2019 by wp-admin Posted in Heavy Duty Diagnostic .

The old bluetooth cat et adatper iii has stopped production, and you may get the new WIFI CAT Caterpillar ET Diagnostic Interface adapter to replace it, autonumen.com has WIFI CAT ET III Adapter Caterpillar ET3 New Arrival.

WIFI Caterpillar ET3 Adapter III 317-7485 CAT ET III Diagnostic

Auto Scanner Tools CAT Communications Adapter III 317-7485 may be the most current generation on the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.This function is necessary for some CAT ET (Electronic Technician) functions.

Actual 2015A Caterpillar ET3 Adapter III P/N 317-7485 Skilled Diagnostic Adapter for CAT with WIFI

This really is the only encouraged communication device for Auto Repair Software program CAT, and also the only datalink device that should permit you to correctly communicate with a CAT engine on dual datalinks.

Software program version: 2015A

2015A Caterpillar ET3 Adapter III Communication:

1. Makes it possible for communication involving service tools and engine controls making use of different data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;

2. Flash program permits adapter firmware upgrades as more attributes turn out to be obtainable;

3. Utilizes J1939/11, high-speed data link (a part of ADEM III controls), substantially minimizing flash occasions;

4. Automatically selects J1939/11 when flashing the engine (reduces the flash time around 80%, from 14 minutes to three minutes).

For anyone who is searching for wireless diagnostic interface for cat engines, please it is possible to pick this new WIFI CAT Caterpillar ET Diagnostic Tool III adapter from www.autonumen.com , and you will get 5% off discount when you order it now.

Best Quality CAT Caterpillar ET Diagnostic Adapter III

Posted on November 4, 2019 by wp-admin Posted in Heavy Duty Diagnostic .

2017A Version CAT Caterpillar ET Diagnostic Adapter III PLUS DELLd630 laptop （Real Caterpillar ET3 Adapter III）
we will install the software before ship, so you can get it work directly after you receive it.
2017A Cat ET software as Cat Caterpillar ET 2015A Software update version, 2017A Caterpillar Electronic Technician softwarer With Autel Tool CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2017.
Cat et Caterpillar Electronic Technician Software 2017A V1.0:
Type of catalogue: Caterpillar Electronic Technician Diagnostic Software
Make: Caterpillar
Region: WorldWide all region
Inclusive languages: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
Caterpillar ET Software 2017A Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Package :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 Cable (from device to your truck)

2017A Version CAT Caterpillar ET Diagnostic Adapter III PLUS DELLd630 laptop

Posted on October 29, 2019 by wp-admin Posted in Heavy Duty Diagnostic .

2017A Version CAT Caterpillar ET Diagnostic Adapter III PLUS DELLd630 laptop （Real Caterpillar ET3 Adapter III）

Cat et Caterpillar Electronic Technician Software 2017A V1.0:
Type of catalogue: Caterpillar Electronic Technician Diagnostic Software
Make: Caterpillar
Region: WorldWide all region
Inclusive languages: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish

CAT ET Software 2017A Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Package :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 Cable (from device to your truck)

Original Factory Caterpillar ET3 Adapter III Compare With OEM Caterpillar ET Diagnostic Adpater III
1. Original Factory Professional Diagnostic Tool CAT ET can use once pluged, no need install the USB drive, the software can automatic realize it for ET3 Adapter, and the machine can automatic weld the high quality Circuit board, quality will be more reliable.

2. The OEM Caterpillar ET Diagnostic Adapter III need use USB Drive to install, and need choose the COM Port, and in the software ET also need choose ET2 then can be used.

The new version of Service Advisor comes in two editions

Posted on October 15, 2019 by wp-admin Posted in Heavy Duty Diagnostic .

The new version of Service Advisor comes in two editions:
John Deere Service Advisor 5.2 2017 Agriculture and Turf Equipment Division
John Deere Service Advisor 5.2 2017 Construction and Forestry Equipment.

Where to buy john deere service advisor Online?
All mentioned versions are listed below. You can purchase John Deere Service Advisor using our website. During the checkout process, you will be given a few delivery options and two most convenient payment methods – credit card using PayPal gateway and Bank transfer (please contact us if you need proforma invoice). We ship worldwide and accept PayPal so you can shop with confidence!

How to install john deere service advisor?

One of the common questions we receive from our clients is how to setup and activate john deere service advisor after purchase and download onto the PC/Laptop? The short answer – we set up and activate it remotely, using Teamviewer.Service ADVISOR is a vast and very complicated application. It’s enough to say that total file size of the Service Advisor is about 50 Gb for v4.2 and 110+ GB for v5.2. The SA supplied as a set of 10 Dual layer DVDs or ISO images in case of v4.2 and on USB HDD for v5.2.
In most of the cases, we re-install the servicer advisor all over again after our customer did to fix his mistakes. To avoid any inconvenience, we recommend using our free remote assistance service with the setup and activation.

Shop John Deere Service ADVISOR from Autonumen.com

If you feel as computer expert or IT technician we can provide you with the step by step installation guide. It covers pre-setup instructions such as set compatibility settings for program components like MS SQL Server 2005, “.NetFramework” and Windows system settings. Also, there is some troubleshooting guide in case of numerous issues during the installation process.

2019A Cat Caterpillar ET Cat ET 3 Software Cat Diagnosis Software

Posted on October 15, 2019 by wp-admin Posted in Heavy Duty Diagnostic .

Cat Caterpillar ET Feather:

Latest Caterpillar ET Software to work with CAT/CAT3 Truck Scanner
With KeyGen Active and Install Video
Support Multi-languages：English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish

Cat et Caterpillar Electronic Technician Software 2019A V1.0:
Type of catalogue: Caterpillar Electronic Technician Diagnostic Software
Make: Caterpillar
Region: WorldWide all region
Operating System: Windows 7 32 bit, Wnidows 7 64 bit, Windows 8/8.1 32 bit, Windows 8/8.1 64 bit, Windows 10 32 bit, Windows 10 64 bit

2019A Cat et Diagnostic Software PC Requirements:
Recommended Configurations:
PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of available hard disk drive
DVD-ROM drive
15.4 inch XGA Screen (1280×1024 compatible)
Microsoft Windows™ 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 9 or newer is recommended.

Caterpillar ET Software 2019 Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.

Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application.

John Deere Service Advisor 5.2.467 2019 Agriculture Equipment Division

Posted on October 8, 2019 by wp-admin Posted in Heavy Duty Diagnostic .

A brand new version of John Deere Service Advisor 5.2 for AG equipment is an offline application, that use Internet Explorer browser to communicate with the user.

JOHN DEERE SERVICE ADVISOR AG 5.2 SPANISH (ESPA?OL) 02/2018 version is also available. Please indicate the preferred language in the comment field during the checkout process.

Important Notice. Installation and activation are possible only with remote assistance using Teamviewer.

Unlike the previous version (John Deere Service Advisor 4.2) to work with the application you need:

Internet Explorer 11 (The shell)
Last version of Adobe PDF reader (you will be asked to download the last version before the installation process begin)
Last version of Java runtime environment (you will be asked to download the last version before the installation process begin)

John Deere Service Advisor 5.2 System requirements:

– O.S.: Windows 7 Pro/Ultimate; Windows 8 Pro, Windows 8.1 Pro, Windows 10 Home/Pro
– CPU: Any CPU for Windows platform
– RAM: 8 GB of system memory
– Hard Drive: 150 GB of available space

JD Service Advisor v5.2 support only Genuine JD EDL V3 DLA Adapter kit (The previous version V2 USB and BT is also supported). If you’re using any other diagnostics tool we do not make any warranties

The represented version of SA 5.2 allows you:

to start the offline version with an active internet connection
The license lasts for 3 years instead of 3 months
Windows 10 is fully supported by EDL v2/v3 kit

Here is the list of the models included in Heavy Duty Truck Scanner Service Advisor 5.2 AG and Turf Equipment. If your model is not listed, please contact us, as some models might be missing in the product description.

The John Deere Service Advisor combines several versions of the program. As well as a number of related programs and diagnostic equipment

Best Quality CAT Caterpillar ET Diagnostic Adapter III

Posted on October 8, 2019 by wp-admin Posted in Heavy Duty Diagnostic .

2017A Version CAT Caterpillar ET Diagnostic Adapter III PLUS DELLd630 laptop （Real Caterpillar ET3 Adapter III）

we will install the software before ship, so you can get it work directly after you receive it.
2017A Cat ET software as Cat Caterpillar ET 2015A Software update version, 2017A Caterpillar Electronic Technician softwarer With Autel Tool CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2017.
Cat et Caterpillar Electronic Technician Software 2017A V1.0:
Type of catalogue: Caterpillar Electronic Technician Diagnostic Software
Make: Caterpillar
Region: WorldWide all region
Inclusive languages: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
Caterpillar ET Software 2017A Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Package :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 Cable (from device to your truck)

Where to buy John Deere Service ADVISOR Online?

Posted on September 24, 2019 by wp-admin Posted in Heavy Duty Diagnostic .

The last update of these products was in June 2016.
Here are some screenshots showing what Service Advisor by John Deere diagnostic software looks like:
john deere service advisor 4 manuals engine section

John Deere Service Advisor Installation on Win7Win10

Posted on September 17, 2019 by wp-admin Posted in Heavy Duty Diagnostic .

Here is the John Deere Service Advisor Installation guide on Win7/Win10.The steps of installation on win7 is same as win7.I will show the John Deere Service Advisor installation on win7,you just need to check the method.And at end of article you would better watch the video guide.

John Deere Service Advisor Freed Download:

John Deere Service Advisor Software Free Download

Note:Try on WIN7 32bit successfully, try Win10 64bit at your own luck.

Procedures of Heavy Duty Truck Scanner John Deere Service Advisor Installation:

Installation Method 1:

1.you must have enough disk space to download the full set of February 2016 data base (52Gb); it comes with seven iso images and the SA4.0 image and a February 2015 update which you don’t need and of course the activator.

2.use an iso mounter software to mount the SA4.0 image to a virtual drive.

3.browse to the setup file in your virtual drive and run it as administrator

follow the steps (it will prompt for a username and password use those of your windows user account if you’re under 7-8 or 10 windows version)

it will take a while! don’t turn off the computer and don’t worry about the incompatibility messages that windows will show you during the installation process specially for the SQL 2005 server installation.

4.after completing the installation of the SA4.0 reboot the computer and set back the system time to mars 2016.

5.mount the first iso image of the data discs to a virtual drive, browse the sauce folder and run setup file as administrator; wait for it to complete the installation it will launch the SA 4.2.005 at this step you may have a message that the SA 4.2.005 is not capable of launching the search engine don’t worry close it and go to task manager (ctr+alt+sup)

click on services and look for the LightweightIDOL service if it’s stopped than run it.

6.run the activator as administrator and activate the service advisor; don’t use the prolongation tool at this step!.

7.now go to the task manager again and look for the SAupdater service and disable it.

8.re-open the service advisor, click the accept button for the license agreement, and configure the path for the data access you can use the mapping for a virtual drive choice to map each data disc image to a virtual drive it will take more than an hour to load all the data disk.

it will ask you for scheduling the update choose the end of the week and create the task.

9.Now close the SA, use the activator again but this time just use the prolongation tool choose 9000 days or whatever you want.

10.Look for the task scheduler and run it, choose the SAupdate task and modify the time for the task to begin to 2030 or whatever you want.

11.reboot the computer and set back the time machine to the actual time, launch SA and everything must work ok.

if you have any trouble than you messed something just clean up and reinstall.

Installation Method 1:

Firstly,you need to download the files as below:

https://mega.nz/#!OocRBC5B!Mg6k1UzCVc168wr–BJ5xTsgGt7TOTsI-AhBNPjVNpk

John-Deere-Service-Advisor-Installation

– Be sure that you have JAVA and Acrobat reader installed on your PC (wich if you have a internet connection it will automaticly ask and find and load its self)
– Mount the CD JDSA4.0 and start the installation ..
– a user name and password will be reqired .. so better to use
User: Admin
Password: 123456

– after the Installation, dont run the program !

– restart your PC ,
– after the installation, use the keygen

– how to use the keygen

– you need to find the Host ID for the installation ..
– Run c:Program FilesECULPECULPINIConfig.exe
– Get HostID from Security tab
– open the keygen and put the Host ID , choose the expire date, select all in both fields and generate.
– you will get 3 files
– run dl.xml.reg file and confirm registry changes
– copy license file jdlm.lic into C:JDLM folder
– PS. DO NOT USE dl.xml.reg file or dl.xml files generated by keygen,( delete the two file made by kg)
– USE the files in the lic folder.

WIN XP:
C:Documents and SettingsAll UsersSApplication DataService ADVISOR
WIN 7:
C:ProgramDataService ADVISOR
– Go to patch1 folder and
– run Patch.bat

– Replace the Original ServiceADVISOR.exe with the Patched one from _patch floder !! in the Installation folder
C:Program FilesService ADVISOR .

– Mount the DVD1 (AG_EN_20xxxx_01) and start the installation from it
in otherwords what i do is copy and paste the data disk 1 in my documents folder. right click
and explore the folder, run the install from the SAUCE folder and then open the sa.ini folder
it will look something like this
[Volume]
Identity=AG_EN_201109_01
Produced=2011/07/15-22:48:58
[Trigger Dates]
Warning = 2011/10/28
Termination = 2011/11/01

– ***Replace the Original sa.ini with the patch we will create, in the DVD1 !!BEFORE YOU LOAD THE DATA!!!!! IN THE PROGRAM.
– To do this
– In the sa.ini folder change the dates to what ever you desire to mach the lic experation you made
so it will look something like this

[Volume]
Identity=AG_EN_201109_01
Produced=2011/07/15-22:48:58
[Trigger Dates]
Warning = 2020/06/01
Termination = 2020/07/01

– Exit the document and select save changes. ( I like to reopen the sa.ini after to insure changes.)
-then open service advisor. it will promp you to load data. change the path to load to the location
you saved data disk 1. let it load ……….and SUCCESS!!!!!